video of my 2 15"s
Do you really!!! thanks 
At least i warned you first...
I was just saying. they needed more power! those subs have mad excursion capability (thats what makes high SPL's). that's not what i was seeing in the vid though. (especially since they where in that large of a box)
I saw two subs running at half their capability.
If it were me I would have only run one on that amp
now that would be a site to see.
I would have saved money and had similar output with better sq.
thats just me and my stupid non-sensible ways though.
im an a-hole i know.
yes i would tell you to run them at 2 ohms.
but its all about how many watts you can tell people your pushing, no matter if their doing anything or not, right? typical.
At least i warned you first...
I was just saying. they needed more power! those subs have mad excursion capability (thats what makes high SPL's). that's not what i was seeing in the vid though. (especially since they where in that large of a box)
I saw two subs running at half their capability.
If it were me I would have only run one on that amp
now that would be a site to see.
I would have saved money and had similar output with better sq.
thats just me and my stupid non-sensible ways though.
im an a-hole i know.
yes i would tell you to run them at 2 ohms.
but its all about how many watts you can tell people your pushing, no matter if their doing anything or not, right? typical.
Member
Joined: Feb 2009
Posts: 854
Likes: 1
From: Madison, Ohio
if gay = informative, then yes.
very very simple... adjust your gains properly and you could run a 10,000w amp on that sub probably. you just have to listen for the tonal change in sound and look for maximum excursion.
even if your amp is rated at 1000w RMS, at minimum gain + volume you would only be running like 10w . yes 10 watts!
you dont have a clue what the recone even calls for on the subs how can you expect to say you could run 3000 watts to one of them? the box is a perfect size for them considering they ask for 3.5-4 cubes per sub with a base of 12-16 sq in of port per cube, 7.5 cu box and 116 sq in of port,
even if your amp is rated at 1000w RMS, at minimum gain + volume you would only be running like 10w . yes 10 watts!
Thread
Thread Starter
Forum
Replies
Last Post
01_ranger_4x4
Vehicle & Meet Videos
13
Aug 28, 2010 05:16 PM
