DOHC - 2.3L Duratec / Mazda L Engines Discussions and Topics specific to the Duratec 4 cylinder engines

help with ranger

Thread Tools
 
Search this Thread
 
Old Aug 2, 2011
  #1  
06_ranger's Avatar
Thread Starter
|
Member
Joined: Aug 2011
Posts: 6
Likes: 0
From: mangilao
help with ranger

i have a 2006 2.3 ranger 2wd

suddenly yesterday,it started hesistating and missing on takeoff from a stop,as i step the gas in it continues to feel like its missfiring then catches itself and pulls.if i rev it in neutral, the hesistation/misfire disappears as the rpms rise, if i push the gas pedal sharply it hesitates as well.has a lopey/rough idle,no CEL on,replaced fuel filter yesterday,ohmed the coiled its good,plugs are good,im leaning towards a sensor or clogged injector.please any input would be great as its my daily drive.
 
Reply
Old Aug 2, 2011
  #2  
killj0y's Avatar
Member
Joined: Mar 2011
Posts: 29
Likes: 0
From: Edinburg
No codes at all? that should def throw a code lol. Not even Ford specific codes? hmm do you have good fuel pressure at higher rpms?
 
Reply
Old Aug 2, 2011
  #3  
BT24's Avatar
Member
Joined: Jan 2011
Posts: 33
Likes: 0
From: Aurora, IL
How about the plug wires?
 
Reply
Old Aug 2, 2011
  #4  
06_ranger's Avatar
Thread Starter
|
Member
Joined: Aug 2011
Posts: 6
Likes: 0
From: mangilao
new wires and plugs,what psi should i be seeing while the truck is on?i hope its not a clogged injector....
 
Reply
Old Aug 2, 2011
  #5  
BT24's Avatar
Member
Joined: Jan 2011
Posts: 33
Likes: 0
From: Aurora, IL
I'm pretty sure you should read 35-50 psi at the fuel pump...I can't see it being a plugged injector...the coils could be bad even though you checked them and they read good...my truck had the same issues and I thought it was a bad fuel injector also...but it turned out to be a bad coil...the coils are cheaper than the injectors and easier to replace....since the plugs and wires are new, I would change out the coils and then run some fuel injector cleaner through the engine...
 
Reply
Old Aug 3, 2011
  #6  
06_ranger's Avatar
Thread Starter
|
Member
Joined: Aug 2011
Posts: 6
Likes: 0
From: mangilao
i forgot to mention i changed the coil with a new one,no difference so i returned it to the auto store,ran stp fuel system cleaner,still no change with fresh gas.
 
Reply
Old Aug 3, 2011
  #7  
fitsector's Avatar
Member
iTrader: (1)
Joined: Nov 2010
Posts: 369
Likes: 0
From: Gto, MX
Just guessing, dont get me wrong.... but I heard from a friend something similar to this and was caused by gasoline mixed with water, he went to a gas station were some ashol%&$ were trying to bust customers with this cheap trick....
 
Reply
Old Aug 4, 2011
  #8  
06_ranger's Avatar
Thread Starter
|
Member
Joined: Aug 2011
Posts: 6
Likes: 0
From: mangilao
thanks,for the gas info,mines all gas lol,fuel pressure check is 10-12 at koeo,at idle 62 psi,whats wrong with this truck,anyone know how the maf should read on a multimeter?
 
Reply
Old Aug 9, 2011
  #9  
06_ranger's Avatar
Thread Starter
|
Member
Joined: Aug 2011
Posts: 6
Likes: 0
From: mangilao
bump,thanks.
 
Reply
Old Aug 9, 2011
  #10  
BT24's Avatar
Member
Joined: Jan 2011
Posts: 33
Likes: 0
From: Aurora, IL
How many coils? My 97 has two...
 
Reply
Old Aug 9, 2011
  #11  
BT24's Avatar
Member
Joined: Jan 2011
Posts: 33
Likes: 0
From: Aurora, IL
Also, clean your IAC and throttlebody...
 
Reply
Old Aug 9, 2011
  #12  
06_ranger's Avatar
Thread Starter
|
Member
Joined: Aug 2011
Posts: 6
Likes: 0
From: mangilao
1 coil pack,cleaned the iac valve and throttlebody too,im lost here.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hunter74
2.9L & 3.0L V6 Tech
21
Mar 6, 2016 11:08 AM
EdgeGOBoom
2.9L & 3.0L V6 Tech
6
Sep 16, 2007 12:01 AM
Snow Wolf
SOHC - 2.3L & 2.5L Lima Engines
20
Sep 4, 2007 09:44 AM
02fx4
General Ford Ranger Discussion
23
Sep 30, 2006 04:40 PM
BananaEdge
General Technical & Electrical
5
Jun 15, 2005 11:05 PM




All times are GMT -6. The time now is 10:10 AM.