2001 4.0 w/ 35" tires stalling.
#1
2001 4.0 w/ 35" tires stalling.
My 2001 4.0 Edge with 35" tires has been intermittently stalling on me after I installed 35' tires. I re-geared to 4:56 gears hoping that would help out but the problem is still occurring. I replaced the speed sensor on the rear axle and that didn't help. The speedometer is operating but it is off a little. My question is have any of you guys encountered stalling after you installed large tires on your Ranger? Could the PCM need to be re-flashed so the computer knows that I have the larger tire and different axle ratio? Is it possible the oss needs to be replaced? The truck has thrown a code for tire/axle ratio incorrect before I re-geared but I made the swap to 4:56 gears and cleared that code and it hasn't occurred since.The stalling mostly happens when I'm coasting or coming to a stop. Thanks for any help.
Thread
Thread Starter
Forum
Replies
Last Post
barrman
General Ford Ranger Discussion
14
07-11-2005 04:19 PM