Found this over at RPS.

http://www.tellico4x4.com/product_in...ducts_id/26509

 

They look like Brazilian AVM hubs. Sweet

 

^ They are. A couple of guys over on TRS are running them and have had nothing but good things to say about the....next mod for me is gonna be the AVM hubs

 

Have any of the members of the Ranger Forum done this installation or... read whether TRS posted a step by step of the hub installation?
For some reason... the TRS website is not opening up at: www.therangerstation.com

If this were my Jeep Cherokee.... then anything from transfercase to axles would not be a problem, but my experience so far with the Ranger is.... That it is not quite as easy to work on !!!

OR 4x4

 

They are a plug and play swap. All you do is remove the hubs like you would to do the PVH "fix"(I suggest you do a search for that) and instead of putting your factory hub in you just twist in the AVM hub. As far as TRS goes, Yeah theyre down, but I dont know why or when they will be back online, and to my knowledge no one over there has done a "how to" on the AVM hubs., but then again the TRS crew is mostly TTB guys so they dont really need the How To there.

 

Thanks for the information.....
Guess I will just use the FSM to disassemble the hub....
Just need to save some $$ to get a set.

OR 4x4

 

Here you go http://www.rangerpowersports.com/orr...ad.php?t=23656

 

Mazda 98,

Great find...
Nice modification !!!
Thanks...

OR 4x4