.

 

bump because there are still questions about axle codes poping up almost daily....

 

how can a D2 in one section be 4.10 and in another section it be 3.45?

 

different axle, different vehicle....

 

This is a good sticky....Answered alot of my questions

 

Couldn't put my tag back on since I now have an SVO girdle on my 8.8. This is off of my 2003 Ranger Edge 2WD 3.0L with the 5R44E

 

nice sticky MO!!!

 

Whoa... i have 4:10's? LOL!! aye guey.

Open 8.8 w/ 4.10 ratio

Great sticky.

 

Awesome sticky we have needed one of these for a while. Good job maurice.

 

hmm could have sworn that i had limited slip.. i dont like this thread anymore.. lol jk.. great job!

 

i will re-edit this whenever i get home with a new picture of the safety certification....

 

Thanks, looking forward to what I have. Could not see the safety cert sticker on this post though, little x.

Needed this info for the Bama.

Thanks again. Bob

 

Thanks for posting this....it helped a lot. Love this forum.

 

Woo hoo! Code R7. I really lucked out with this truck man. I got the 4.0L SOHC engine and the limited-slip 8.8" rear with 4.10 gears. Awesome.

 

I was wondering if anyone knows how many splines I have. The sticker on my door gam says my axel code is 97 and on my differential the stamp is
V330V
4 10 88 5L04

Thanks

 

should be 28

 

^^it is a 28 spline......

 

thanks maurice!

 

I am going to be running 35's and I think I am going to regear to 4.88's right now i have 4.10's but I was wondering if I regear with that will it bring me back to stock power or will I get an increase in power?

Thanks

 

if you change tire size to a larger tire, then when you regear, it will get you back to stock...

 

I havent found a solid answer anyplace so I'll ask it here, I have a 2003 4.0L edge w/4.10 open diff, and am on the hunt for a limited slip/locker. What spline would this axle be? I have seen both 28 and 31 on many sites for this axle. Has anyone had any problems with a Powertrax lock-right locker?

 

you have a 28 spline axle.....the ONLY Rangers that came with a 31 spline were the '02 FX4's and the '03+ FX4 Level II's........

 

R-7 axle here. :)

 

well crap!!!!! i have 3.73s.. man i was hoping i would have 4.10...oh welll....at least it is limited slip....

 

I already knew I didn't have an lsd but know I know I have 3.55's that sucks nice thread though