considering it? don't know much, tried searching, couldn't find much. recomend doing it? anyone

 

do it, but i wouldn't recommend cranking them more then 4-5 full turns

 

I did 5 full turns. It raised an inch.

 

Info here

http://www.therangerstation.com/tech...orsionBar.html

And here

https://www.ranger-forums.com/forum2...flicting+steps

 

so the purpose is to lift the truck? I'm doing a 3" BL is t-bar cranking an added way to get extra lift?

 

Yes you will get between 4 or 5 inches in the front if you crank your t-bars and install a body lift. just make sure you get an alignment if you crank them alot, that way you dont ruin your tires.

 

Edges come with the rear sitting an inch higher than the front. In order for me to fit my 32 inch BFG A/T's with no lift I had to level out my truck and raise the front an inch. So that's where the cranking of the t-bars came in.

 

okay, should i crank mine, i don;t have an edge, and will have the 3" bl, or is it more a personal opinon?

 

Not sure....I believe you won't need to since your 4x4 and getting the lift. Someone else should chime in with their experience/advice.

 

i got 34"s on a t-bar crank in the front and the rear stock (for right now) And i got around an inch on the t-bar crank...


EDIT: I have an 4wd aswell