So i was having and issue with a soft clutch on my 94 with the 2.3 liter to the point where i couldn't put the truck in gear, so i replaced the master cylinder and bleed the system and it was back to normal, but about a week later i was having the same issue so i bleed the system again and the problem was fixed. So now a week after that the problem has come back. Has anyone had this reoccurring issue before? I think I am going to replace the o-ring on the hydraulic line that connects to the slave cylinder on the side of the transmission and see if that fixes it. Has anyone ever had this happen because of a slave cylinder? any input would be appreciated. Thanks.