Anyone know where to get them? I know people have mentioned it before, but never where they are at. I also want to make sure they are a common head size, btw I don't know the head size of the stock ones

Are the mustang ones the same? I assume they would be, because I found this http://www.latemodelrestoration.com/...ff-Cover-Bolts

I didn't know if the thread counts were different or something

 

Can't answer your question, but those really would look sweet. Although I'm not sure about $25 for them.

 

I went to the local ACE hardware with an old bolt, matched up the thread dimensions and got the SS bolts they had. Dont remember how much it was since I did it 4-5 years ago.

 

I thought about just going to the hardware store too. That would probably be the easiest and cheapest

 

www.mcmaster.com


all you could ever need or think of and great shipping

 

Thread pitch should be the same, but I agree with the above. Go to a hardware/fastener store and you'll probably get them cheaper!

 

+1 on going to local hardware store.

My PML cover came with really nice polished stainless allen head bolts and washers, otherwise I would have done the same thing. Ace sells a lot of stainless bolts, but I don't think they sell them polished if that matters to you. They have like a raw brushed gray look.

 

This is what I did, and recommend.