wont to get some hid fog light for my truck up my valance dose not have any spot for the fog lights dose any one know of a valance that will work on my truck with out changing the bumper or if there is any fog lights that come with a plastic pice to make it look stock thanks for your help put up some pics of my bumper in a few min

 

here is pic for my truck

 

im not sure, but most of the valances bolt on to the bumper

 

This is how my 04 was when i bought it i didnt get to many before pics before i modified it but the front valiance had a spot with some honey comb knockouts in them... I wanted foglights so Instead of buying the new plastic things i used a dremal to cut the squares out and then added the fogs... Your valiance does not have those spots so you will have to A get a Valiance with fogs or B get a Base Valiance that has knockouts and do what I did... As far as Wiring goes check your frame and see if you have a harness clipped to it if so you can chop that and use that wring to wire to a relay




this is what it looks like with valiance off... Its got about 10 screws holding it on

 

i was wondering about that wiring, and isn't the switch for the lights behind our radio bezel? will they work?

 

The wiring is normally there however some other components are missing too... It was easier to clip the wires on the frame throw my own relay in and trigger it to my fogs... However you can still wire it to a factory switch. but you will need a relay in there

 

where did you buy those fogs at? i have an 01 xlt with that same valance

 

what is a base valance? and dose anyone know of a fog light kit that comes with a recessed piece so i don't have to change my valance and bumper

 

dude your gonna have to flush mount it or buy a new one, thy dont make a recessed kit for the ranger, or at all as a matter of fact, go to a Jy and buy a cheap bumper

 

get the ford fog lamp kit for a 2004 ranger.

 

That only works if you have the punchouts like mine has... As for the lights They are DEPO an aftermarket company. I got them at the place i used to work at for 30 bucks a pop...

 

ahhh gotcha

 

so what surface mount fog light will work good and look good on my valance and i do wont them to be hid fog light if any one knows where i can get some high quality one for a good price i would much appreciate it

 

You could make or get the brackets that bolt right to the bumper and get some Hella 500s or something right by the grille like I have