running boards!!
#1
running boards!!
alright. i want to remove my running boards it isnt difficilt besides the forward bracket closest to the front. i can get at the nuts no problem(no pun intended) but the bolt head is in a little cavity i cant get at ??? is there a way to undo the nuts and not need to get at the bolt head?
please help..
please help..
#2
You can remove the bars without removing the 'bolts'/studs up front. Just undo the nuts and the bar is off up front. You don't even have to fully undo them...just loosen them some and the bar will slide out of the stud.
To get the studs out, you'll need to lift up your carpet where your feet would be while driving. Pop off the bodymount rubber grommet/cap, then snake the bracket out of the cavity.
To get the studs out, you'll need to lift up your carpet where your feet would be while driving. Pop off the bodymount rubber grommet/cap, then snake the bracket out of the cavity.
#4
#8
#12
You guys realize you can remove the front mounting studs from the bottom right? You just lift up on the stud mount and fish it out the big hole in the crossmember. I bought my running boards off a brand new 09 Ranger and I personally removed them myself. This is how I removed the stud mount and reinstalled it in my 04. I remember thinking to myself as I was taking them off his truck, "great I'm gonna have to leave that mount behind cause it doesn't look like its gonna come out of the frame."
#15
Thread
Thread Starter
Forum
Replies
Last Post
spec_ops57
General Ford Ranger Discussion
13
12-27-2005 08:42 PM
02FordFX4
Exterior Semi-Tech
25
02-15-2005 03:35 PM