hey guys i was going to atempt they blinker mod and i dont understand the wiring, its talks about 6 wires. well two come from the side marker, three from the outer bliker light and three from the inner blinker light so im a little cofused about witch 6 wires its talking about any help please pic if have any....

thanks -david

 

Look through these threads:

https://www.ranger-forums.com/forum2...inker-mod.html

https://www.ranger-forums.com/forum2...oes-along.html

https://www.ranger-forums.com/forum2...inker-mod.html

https://www.ranger-forums.com/forum2...inker-mod.html

blinker-mod-video.html

.

 

looked on the how to still not certian on witch 6 wires..............

 

All your going to do is cut the ground wire (usually black) for the side marker lamp and move it to the turn signal power feed wire (usually green) going to the front turn signal lamp.

Look through those links, pics, and videos. Here is another with diagrams: Daniel Stern Lighting Consultancy and Supply

.

 

I made a picture and posted it on RPS, it explains it easily, give me a minute to find...

 

here you go....best instructions everrrr

 

Here is where that picture is from. One of my favorite mods on the ranger.
HOW TO: Blinker Mod-revised instructions - Ranger Power Sports Forum

 

You don't need to cut both wires at the marker lamp, only the black wire. Here's a modified schematic version of Daniel Stern's for the Ford Ranger.