does ne one have the measurements for anything so i can mount them perfectly on the ranger:)


edit, i wanted to put this in exterior i dont know how to move it?

 

cab roof lights are best for full size trucks. for a ranger, it would look better without the lights. or, get a sunvisor and they have small integrated lights built into the visor.

this is just my opinion.

 

You gotta make your own measurements man.....some folks like the 5 lights spaced equally apart.....while some like the 3 in the middle and two on the outside.

There's a couple threads regarding this exact subject....use the search function.

Cab Clearence lights are a "love it/hate it" sorta thing. Me personally...I love it.

 

And I hate it

 

The evenly spaced are my favorite, the older fords had evenly spaced. or just get the big unibrow ones like the Gm's have lol

 

I like the lights on a 150 or bigger I haven't really thought about them on a ranger. It would depend on the look I guess. as far as mounting them I would put them with the 3 in the middle close to gether and then ones on ends of the cab. it looks better to me. On my F-150 I had mine mounted that way with 5" separation. (that was front tip to front tip) on the middle 3 and the ends just at the beginning of the roll down to the drip rail.

it's all in your personal taste. How ever you want it you go for it!

Hope that helps.

Arin

 

I dont like them but I like them more than those Mexican Visors

 

if a ranger had a powerstroke with 2 stacks out the back and some 38" tires i think it would look bad*ss

 

^^ i agree.. thoughs lights are an over kill on a compact truck.. i have seen a few drive by me at night and it just dosent look right..

hate it or love it is right..

 

Not something I would do but I say if you love it go for it

 

ya, ive seen them on rangers and i like it

 

i have a full set from a f-350 if anyone wants to buy them?

 

I've seen like 2 rangers with them and I like the idea, it's that or buy a light rack and rock a couple kc's

 

here ya go man.












i only used four lights so i used the center as a reference and adjusted accordingly.







I wired the lights into the headlight switch wire so that when i pop the headlights on the cab lights come on. I also wired in a 10a fuse. Hope it helps.

 

4 fits a ranger better than 5 does. I like!

 

i think i might actually do that

 

It only cost me about eighty bucks and change to do, I used led bulbs so there was about twenty bucks there and then wiring is pennies, bout 25 feet. The smoke lens was about 30 bucks and then the housings themselves were just under ten bucks mind you that is at cost cuz I worked at the stealership. And then small stuff like shrink wrap and connectors.