How to do a 06+ Tailgate?
I want the look of the 06+ tailgates. Anyone done this without buying a new tailgate. I know the ford emblem on the -06 tailgates have 3 little holes on them that fit into the tailgate. Does the 06+ side emblems, that are on the tailgate too, have 3 holes in the same place?
is there any drilling with the HUGE Ford emblem in the center of the tailgate also? Help me out guys |
4 Attachment(s)
Get big huge 06+ Ford emblem(lol). I got mine for about $20 from ford, but some people have said it's now up to $40. Get 06+ fender emblem. While at dealer, take a ton of measurements of a new truck's tailgate. Remove little blue oval. Lay down your masking tape and make your markings. Break-off all the alignment pins on the emblems.
If you don't want the "bubble" look of the 06+ blue oval emblems, but still want the size and want to match your existing grille emblem, order a tailgate emblem for a 04-05 F150. It's the same gel coat emblem as your grille, only 9" wide, just like 06+ Ranger tailgate emblems. None of the tailgate emblems fit in any of your 05 and older tailgate holes. You need to break off all alignment studs from the emblems...this will make it a no-drill install and totally reversible if wanted down the road. I laid the masking tape, measurements, markings, and emblems with the tailgate laying on the garage floor. I did all the stock 06+ tailgate measurements, only mirrored to cover up the holes from the old little blue oval. kinda like this... Attachment 120601 Attachment 120602 Attachment 120603 Attachment 120604 |
Great info Shane.. Any excuse to whore that thing out I suppose lol
|
Hmm i think i will have to do this on my steppie
|
Mine came that way it's a 07
|
Originally Posted by 84 GT 5.0
(Post 1595235)
Mine came that way it's a 07
|
Thanks shane...So that was kinda hard to understand why'd you use masking tape, to make sure everything was centered? So Basically get the 2 new emblems, brake the pins off of both and just stick them on there? Will that adhesive be enough to hold the emblems on?
|
question.
the older tailgates. they dont have any holes in them for emblems? the emblems just use adhesive? |
Originally Posted by ranger_1999
(Post 1595261)
Thanks shane...So that was kinda hard to understand why'd you use masking tape, to make sure everything was centered? So Basically get the 2 new emblems, brake the pins off of both and just stick them on there? Will that adhesive be enough to hold the emblems on?
Yep....get new emblems, break studs off, stick 'em on. It's how your fender and tailgate emblems are held on already. Yeah...they'll hold.
Originally Posted by Tys 4x4 FTW
(Post 1595263)
question.
the older tailgates. they dont have any holes in them for emblems? the emblems just use adhesive? |
what about the steppy tailgates? do they have the holes?
|
Originally Posted by 01_ranger_4x4
(Post 1595300)
what about the steppy tailgates? do they have the holes?
|
Originally Posted by Fx4wannabe01
(Post 1595305)
Only ones that don't are the 93-94's to my knowledge. I've got 3 here and all 3 have holes.
|
Okay shano. Thanks man, really! Im glad we have some gurus that know this kind of stuff..Oughta make this a How-to
|
Yeah Shane and I did it around the same time. If I can find my measurement pictures I can through up a quick how-to, its easy to do.
|
Shane whered you get that ranger rectangle emblem? Never seen the oreo ones before?
|
Thats on every 06 and newer Ranger...
|
Originally Posted by 04blackedge
(Post 1595337)
Thats on every 06 and newer Ranger...
|
Shane painted his DWB
|
Originally Posted by atrocity
(Post 1595341)
coulda sworn they were silver with black lettering though?
I actually acetoned the black lettering, masked the letters, then color-matched them. Leaving an inverse of stock. aka...oreo. lol. They're now Deep Wedgewood Blue with Chrome lettering. Stock is Chrome with black lettering. Still havn't gotten around to doing my fender emblems yet. The masking is one hell of a chore... https://www.ranger-forums.com/f39/2-...e-5-1-a-87207/ |
>>>>
1 Attachment(s)
I have a friend with a 01 XLT Supercab that put a late model tailgate on, here's a cell phone pic:
Attachment 120564 OBTW: That's a Rhino Lining paint job!:biggrin: |
Ive been wanting to get my emblems removed on my 08. I did not know there were as many people on here that would want them.
|
Originally Posted by sjwilson3821
(Post 1595708)
Ive been wanting to get my emblems removed on my 08. I did not know there were as many people on here that would want them.
|
That's definitely a different Ranger Tim! Specs and MOAR PICS!
|
3 Attachment(s)
When I swapped beds mine had no holes in the tail gate, so I was able to set it up like a stock 06+ tail gate. I have all the measurements written down on a pad in the truck. If no one else get them up here the next time I go outside I'll try and get them up here.
Attachment 120554 Attachment 120555 Attachment 120556 |
|
All times are GMT -6. The time now is 11:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands