I was wanting to install two lights facing backwards but im not sure where to mount or what to mount them two anyone have any ideas....i was thiniking of getting something to fill the stake holes but i wanted them actually closer to the cab

 

light bar

 

I've got 2 mounted on the back most bar of my stock roof rack, but that doesn't help you any I guess...

best bet would probably be as you suggested, something to mount them two in the stake holes....or on a tool box, if you have one..

 

Here is my old setup with "backup" lights!




I have taken these off and sold them..I now have the Light Bar on top with two of the lights turned around!

 

get this and turn two around

 

I mounted two under my bumper next to either side of my hitch for protection
they are the KC All Purpose Driving lights they are really slim and shine a nice horizontal beam completely 180 degrees behind me.

They were only like $50 for the set and I have wired in seperate from backup lights...I'm alittle concerned about big rocks and such while offroading but it shouldn't be too bad...they are really tucked in there!

 

It would be intresting to mount an underbody neon tube underneth the sides of the bed out of view, to shine into the bed.

 

I had backup lights on my truck...

But took them off because keep brokin the fuses...

But it looks better how tho...

I like to get a light bar but it stand to high for where I park my truck at home...

Here's what they looked like...

 

blktremor02.....how did u make those mounts?? that is exactly what i have been lookin to do with the cb whip and reverse lights! i guess i wasnt so origional....

 

^^^go up to radio shak and look in the cb section. theyve got all kinds of diamond plate "lifters" like that.

 

ok u all can laugh but i use to have the neon under glow in my bed back when i first got it just for the hell of it and it looked pretty cool when i would do a burn out i will have to look around here and see if i still have the led underglow and if i do i will have to mount it up in the bed and do a burn out and take some pics

 

I want to mount cold cathodes under the bed rails in my bed...I have a Tonneau that will probably never come off so I can mount them to the t-cover rail.
Soons I get the extra money I'll be doing something like that. I'll take a picture of my truck soon...to show ya'll my rear mounted lights. They are really similar to BigWill's but further apart.