New to rangers. Front bumper questions.
Thread Starter
|
Member
Joined: May 2018
Posts: 3
Likes: 0
From: Mt. Sterling
New to rangers. Front bumper questions.
Hello everyone.
I just bought a Ranger and I have never owned one. I have searched on here but I can’t find exactly what I am looking to know. There isn’t a lot of love for the 04-05 Rangers and I have an 05. I have a xl model w/o fog lights and was wondering if a valance with the fog lights would bolt right up. If so, what year would work. If not, what is needed to modify? I would wire in my own fogs, so that’s not what I am asking.
Any help would be great! Thanks!
I just bought a Ranger and I have never owned one. I have searched on here but I can’t find exactly what I am looking to know. There isn’t a lot of love for the 04-05 Rangers and I have an 05. I have a xl model w/o fog lights and was wondering if a valance with the fog lights would bolt right up. If so, what year would work. If not, what is needed to modify? I would wire in my own fogs, so that’s not what I am asking.
Any help would be great! Thanks!
Member
Joined: Jul 2016
Posts: 2,022
Likes: 44
From: BC Canada
https://www.rockauto.com/en/catalog/...ance+panel,820
I think this is what you're after, third one down.
On my Mazda B3000 (much different), the lower valance bolted and snapped into place, but I'm betting the Ranger is similar.
You will have to remove the bumper to do it.
In your case both valances are the same, except one has the cut outs for the lamps.
And you'll need the fog lamps too.
https://www.rockauto.com/en/catalog/...p+assembly,803
I know you said you could wire them in, but look for the plugs, they may be present and capped off.
I think this is what you're after, third one down.
On my Mazda B3000 (much different), the lower valance bolted and snapped into place, but I'm betting the Ranger is similar.
You will have to remove the bumper to do it.
In your case both valances are the same, except one has the cut outs for the lamps.
And you'll need the fog lamps too.
https://www.rockauto.com/en/catalog/...p+assembly,803
I know you said you could wire them in, but look for the plugs, they may be present and capped off.
Thread Starter
|
Member
Joined: May 2018
Posts: 3
Likes: 0
From: Mt. Sterling
So they do swap, I just have to take the cover off as well. That's fine because I needed to take that off and sand & paint it anyways. I don't think I have the plugs because I did not see them when I looked. thank you!
Thread
Thread Starter
Forum
Replies
Last Post
xp1ik99
OLD - Interior, Exterior, Electrical, & Misc.
5
Oct 5, 2010 06:57 AM
abq02ranger
Fabrication & Tool Tech
4
Aug 2, 2010 12:19 PM
Want to Buy: stx front bumper/ striker bumper
fnimgrtone
OLD - Interior, Exterior, Electrical, & Misc.
0
Apr 5, 2010 08:28 PM
