Post your 3in body lifted truck with 33's
 

Hey,im new here.Im looking to put a 3in body lift with 33 in Bf Goodrich A/T on my 2001 Ford Ranger Edge 2wd with a manual trans.What kit should I buy at a decent price that will come with everything I need,with the extensions and everything?And also,could you post your truck with a 3in (or 4) body lift with 32's or 33's?Thanks

do a spindle lift since you are 2wd looks so much better.

Where could I get them,and about how much would it run me?I love your truck.What lift do you have on it?

He has a bodylift. Us 4x4er's get bodylifts cause the cheapest suspension lift is $1800.

PA(Performance Accessories) makes the just about one and only bodylift for the new rangers. Its 199 and extra for the shifter extension. The spindle lift runs about $600 or more I think.

My pics:
http://tinypic.com/ampc0m.jpg
http://tinypic.com/ampc8z.jpg

I had a 02 4x4 Edge w/ 3" BL, AAL and torsion crank on 33x12.50's.

This is winks's truck, BL was a real PITA to install, but was worth it. Performace Assec. 4wheelparts.com $160

http://i11.photobucket.com/albums/a1...4/DSCN3981.jpg

most autoparts stores online do,...http://4wheelparts.com/4wp/products/...AB&expand=sub3

he has a body life because like pincone said 4x4 ones cost in the thousands

BLs are retarded on a 2 wheel drive. If you want a good looking lift go with the spindle. It isnt any more expensive and it will actually lift your suspension insted of faking it!

here ya go.......

http://memimage.cardomain.net/member.../704973_63.jpg

http://memimage.cardomain.net/member.../704973_64.jpg

http://memimage.cardomain.net/member.../704973_67.jpg

http://memimage.cardomain.net/member.../704973_33.jpg

http://memimage.cardomain.net/member...88_97_full.jpg

http://memimage.cardomain.net/member...88_91_full.jpg

im not 2wd but you want spindle trust me. tomorrow i will load some pics of the differences.

http://tinypic.com/6525tx

Barely any torsion bar crank, no tire rub, 33x12.5x15, 15x8in rim.

^^^^^^^Thats a beautiful thing right there, a nice banana truck wrapped up.

3"' Body lift, 1.5" torsion bar crank. TSL TrXus 33x12.50x16

http://img.photobucket.com/albums/v2...43242072_l.jpg

gonna have to agree with zabeard, since you're 2wd do a spindle lift and aal's

but here is my 3" BL w/ 33x12.50's
https://mspace.utep.edu/amacias2/Ranger/liftoff7.JPG
https://mspace.utep.edu/amacias2/Ranger/wheelin6.JPG
https://mspace.utep.edu/amacias2/Ranger/wheelin7.JPG

Freddy

you can get brand new doetsch (sp?) spindles off of ebay for $300 plus i think $50 for shipping

http://memimage.cardomain.net/member...657_4_full.jpg http://memimage.cardomain.net/member...657_2_full.jpg

All these pics and opinions are great and all, but remember you are a 2wd xlt, you dont have t-bars to crank so you wont be as tall as half these guys and fitting the tires you want is going to be a little harder, in the end i would do a body and spindle ift, its money but it will get you up to where you wanna be. you 'll probably need to add a leaf too

I have a 2wd Edge.I cranked the torsion 2 in.Im gonna get a spindle lift with 33's,thanks everyone

Freddy i envy that top...I'm going to get one when my truck is done...

VERY smart move it your 2wd there is nothing better then a spindle lift

how do you know?
they dont make spindles for the gen 3

Who cares Chris, quit instigating sh!t.

Good choice with the spindles.

FYI a spindle lift doesnt "lift the suspension", its as much "faking it" as a body lift. you will get more clearance underneath with spindles though, that is undeniable.