Hey,im new here.Im looking to put a 3in body lift with 33 in Bf Goodrich A/T on my 2001 Ford Ranger Edge 2wd with a manual trans.What kit should I buy at a decent price that will come with everything I need,with the extensions and everything?And also,could you post your truck with a 3in (or 4) body lift with 32's or 33's?Thanks

 

do a spindle lift since you are 2wd looks so much better.

 

Where could I get them,and about how much would it run me?I love your truck.What lift do you have on it?

 

He has a bodylift. Us 4x4er's get bodylifts cause the cheapest suspension lift is $1800.

PA(Performance Accessories) makes the just about one and only bodylift for the new rangers. Its 199 and extra for the shifter extension. The spindle lift runs about $600 or more I think.

My pics:



I had a 02 4x4 Edge w/ 3" BL, AAL and torsion crank on 33x12.50's.

 

This is winks's truck, BL was a real PITA to install, but was worth it. Performace Assec. 4wheelparts.com $160

 

most autoparts stores online do,...http://4wheelparts.com/4wp/products/...AB&expand=sub3

he has a body life because like pincone said 4x4 ones cost in the thousands

 

BLs are retarded on a 2 wheel drive. If you want a good looking lift go with the spindle. It isnt any more expensive and it will actually lift your suspension insted of faking it!

 

here ya go.......

 

 

im not 2wd but you want spindle trust me. tomorrow i will load some pics of the differences.

 

Barely any torsion bar crank, no tire rub, 33x12.5x15, 15x8in rim.

 

^^^^^^^Thats a beautiful thing right there, a nice banana truck wrapped up.

 

3"' Body lift, 1.5" torsion bar crank. TSL TrXus 33x12.50x16

 

gonna have to agree with zabeard, since you're 2wd do a spindle lift and aal's

but here is my 3" BL w/ 33x12.50's




Freddy

 

you can get brand new doetsch (sp?) spindles off of ebay for $300 plus i think $50 for shipping

 

 

All these pics and opinions are great and all, but remember you are a 2wd xlt, you dont have t-bars to crank so you wont be as tall as half these guys and fitting the tires you want is going to be a little harder, in the end i would do a body and spindle ift, its money but it will get you up to where you wanna be. you 'll probably need to add a leaf too

 

I have a 2wd Edge.I cranked the torsion 2 in.Im gonna get a spindle lift with 33's,thanks everyone

 

Freddy i envy that top...I'm going to get one when my truck is done...

 

VERY smart move it your 2wd there is nothing better then a spindle lift

 

how do you know?
they dont make spindles for the gen 3

 

Who cares Chris, quit instigating ****.

Good choice with the spindles.

 

FYI a spindle lift doesnt "lift the suspension", its as much "faking it" as a body lift. you will get more clearance underneath with spindles though, that is undeniable.