Exterior Semi-Tech General discussion of exterior for the Ford Ranger.

door not closing.

Thread Tools
 
Search this Thread
 
  #1  
Old 01-08-2012
mcd58's Avatar
Member
Thread Starter
Join Date: Oct 2011
Location: connecticut
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
door not closing.

freuqently when i get in my truck my door dosent close all the way. but enough so the door chime dosent go off. i dont notice it all the time until i hear the wind coming in. any suggestions on how i can fix this so it closes easier.
 
  #2  
Old 01-08-2012
Brandon97xlt's Avatar
Member
Join Date: Sep 2010
Location: Warsaw, Indiana
Posts: 280
Likes: 0
Received 1 Like on 1 Post
Adjust the door latch or re-align the door
 
  #3  
Old 01-08-2012
Taylor's Avatar
Ive been dubbed....an old volk
iTrader: (18)
Join Date: Mar 2010
Location: Nashville, NC
Posts: 7,110
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by Brandon97xlt
Adjust the door latch or re-align the door
^Try this first.

Is any of your weather stripping folding over or falling off?
 
  #4  
Old 01-08-2012
Scrambler82's Avatar
Old Guy User…
iTrader: (12)
Join Date: Jul 2009
Location: SoCal
Posts: 7,909
Received 74 Likes on 64 Posts
Before any changes, take a can of Silicone Lube or WD40, spray the lock assembly, lift the latch and do that too.
Slam the door a few times and see if that helps.

After that lube your door hinges using White Grease.
 
  #5  
Old 01-09-2012
NewShockerGuy's Avatar
Member
Join Date: Sep 2011
Location: NOVA
Posts: 724
Received 7 Likes on 6 Posts
Icon2

Originally Posted by Brandon97xlt
Adjust the door latch or re-align the door
How does one do this?

Thanks,
-Nigel
 
  #6  
Old 01-09-2012
Brandon97xlt's Avatar
Member
Join Date: Sep 2010
Location: Warsaw, Indiana
Posts: 280
Likes: 0
Received 1 Like on 1 Post
To re-align the door you have to loosen the bolts holding the hinges to the door and to adjust the latch you can either move the latch around and/or the thing that the door latch catches on. But the best thing to do first is take a pencil and mark where everything is so you can put it back where you first had it in case it doesn't need to be adjusted.
 
  #7  
Old 01-09-2012
Scrambler82's Avatar
Old Guy User…
iTrader: (12)
Join Date: Jul 2009
Location: SoCal
Posts: 7,909
Received 74 Likes on 64 Posts
LUBE THE LATCH, you might be surprised and a lot less work !

Even if it doesn’t work can’t hurt.

I had the same problem, dinger going off all the time, door not closing when I get out.

I lubed the latch as suggested by a Site-Friend from this site and wham-bam the door closed tight and the dinger didn’t ding unless the door was opened.
 
  #8  
Old 01-09-2012
Timberwolf's Avatar
Member
Join Date: Oct 2010
Location: East coast Canada
Posts: 706
Likes: 0
Received 0 Likes on 0 Posts
SLAM the MF'r closed!
 
  #9  
Old 01-09-2012
mcd58's Avatar
Member
Thread Starter
Join Date: Oct 2011
Location: connecticut
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
thanks a lot for the help ill take a can of wd40 to it tomorrow and see if that changes it.
 
  #10  
Old 01-13-2012
rjohnson5481's Avatar
Member
Join Date: Oct 2011
Location: Tucson, AZ
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
aligning the hinges is a bitch, and a two person job. Don't loosen those suckers unless you have some time and a friend.

using a jack helps too, so you can support the door and fine tune the level of it.
 
  #11  
Old 01-13-2012
Scrambler82's Avatar
Old Guy User…
iTrader: (12)
Join Date: Jul 2009
Location: SoCal
Posts: 7,909
Received 74 Likes on 64 Posts
Originally Posted by mcd58
thanks a lot for the help ill take a can of wd40 to it tomorrow and see if that changes it.
Hey,

How’s this going ?

Any luck with the spray ?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ranger
General Ford Ranger Discussion
12
09-01-2007 07:17 AM
PW01
General Ford Ranger Discussion
8
09-19-2006 02:34 PM
Rob99
General Ford Ranger Discussion
6
12-04-2005 06:55 PM



Quick Reply: door not closing.



All times are GMT -6. The time now is 08:41 PM.