what kind of foglights do i need? i have a ranger xlt. it has a place to put foglights but does not have any foglights.



the rangers xlt with extended cab have them?

what do i need?

i have tried the ford website and i get nothing.

are they expensive?

i have called the dealers ships but say i have to go over personal. so i need help.

is there an alternative?

 

I would say they are the square ones. Check ebay. I think you might have to get a new valance to fit them as they mount to the inside. You can also find that on ebay.

Hope this helps some!

 

xlt 4x4s, sport/edge, and other 4x4 trims get the fogs, you would need a whole new valance...unless you want to cut the holes...

 

get a whole new 01+ bumper/valance with fogs

 

stick with the 04+. It flows better with your grill.

 

what is a valance?

mean?

 

here's a little visual:



You need the valance and bumper from a ranger that is 2004 or newer.

And also, those are the foglights you would need.

I said "stick with the 04" meaning stick with the 04+ bumpers, because it will flow better with your grill.

here is a picture of the 01-03 front end:


(this is Greg's truck by the way --> Scallion02Edge)

EDIT: Actually, you have an 06+. You can get the 06 bumper/valance combo, or go with the 04-05 bumper/valance. They are a little different, but will still match your more squarish front end.



EDIT #2: It seems like you have the 06+ bumper, so you would only need the 06+ valance. I'm not sure how much more expensive they are, but if you want, you can remove the whole 06+ bumper AND valance together, and swap in a 04-05 bumper/valance

EDIT #3: Here are some links to the 04-05 (possibily 06 & 07) fog lamps. This is so if you want to cut the hole in your existing valance to fit these foglamps.

Foglamps

Left Hand Side

Right Hand Side

Bumper Only (Black)

Bumper Only (Chrome)

R-F's Zach (zabeard) selling his chrome bumper for cheap

And I'm not sure if you need the bumper brackets..

Left Hand Side Bumper Bracket

Right Hand Side Bumper Bracket

Valance

01-03 (Grey) Valance

 

rong5,

thanks for the help. that has answer all my questions. that is one sweet looking truck you got there.

 

Amazingly my 2004 XLT ECSB 4x4 has no fogs, but has the valance for them. There are filler inserts where the fogs should go. I checked on the factory fogs and they are $235!!!!

 

My 04 did not come with factory fogs. It did already have the wiring needed though. I bought the square fogs from a member here and they plugged right in. I also had to get a fog light switch and relay from ford. I also go another bezel with the fog light cut out from a member here as well. Very easy to do. I would recommend doing it if the wiring is already installed in your truck.

I can not tell but your valance looks like it may have the pop outs for the square fogs. I did not need to get a new valance on mine. All I had to do was loosen a nutand they poped right out. I was able to get 2 brand new fogs with mounting brackets off here for 60 bucks. The bezel I got for 30 from a member and I had to go to ford for the relay which was 15 and the foglight switch which was 40. Although if your not impatient like me you can get the switch off ebay.

 

04rangerxlt, thanks for the info. i am patient. it is on my mods to do.
1. tint
2. is a to fiberglass cover( Tonneau Cover)
3 is the foglights

 

Go buy some Light tabs from JusnesModified.com and throw on some cheapo LightForce 240XGT HID lights...lol. I want to, and I'm pretty sure they will fit. Oh, those lights are like $500ea, btw.