i found these around me... will they fit my truck?
http://westernmass.craigslist.org/pts/291988912.html

 

those look like foxbody rims.. if so, they wont work because they're 4 lug.

If they are 5 lug ('94+), then *maybe* as sometimes the hole isnt big enough for the ranger hubs to fit through (on some OEM stang wheels).. even then, you may need adapters to be able to use the front center caps.

 

Yeah those look like a 93 or preivoes pony's

 

no they are 4 lug

 

those are the stock pony wheels that came on fox body mustang gt hatchback and gt convertibles only between 1990-1993. They are four lug and will not fit your application. There is not a company anywhere that sells these pony wheels aFtermarket in a five lug version. As far as bolting a mustang wheel to your ranger, the common for five lug bolt pattern was used in the 60s on mustangs and again on any mustangs from 94 to current. Depending on the wheel, the size and backspacing are all different, some will work others won't, but all of those will at least be able to bolt onto your stock ranger spindle. There are tons of other wheels also that use the same bolt pattern.

 

nope.....those seem to be 4 lug