You can't see through my truck anymore!
#1
Join Date: May 2005
Location: Jackson, New Jersey
Posts: 4,872
Likes: 0
Received 0 Likes
on
0 Posts
You can't see through my truck anymore!
Well, its been over a year, so I finally picked up some vinyl covering and made gap guards for my truck. Now people can't watch the traffic through the side of my truck anymore.
I bought the material from Home Depot, it cost me about $12.00 for 6 foot. Because of the body lift the front splash guards weren't doing much, so I made my own with 3" extensions as well.
I cleaned it up, and took a few photos down at the local track afterwards.
Stock splash guard
Splash guard removed
New splash guard vs. stock
New splash guard during flexing
Without gap guard
With the new gap guard
PS of my favorite shot of the day
I bought the material from Home Depot, it cost me about $12.00 for 6 foot. Because of the body lift the front splash guards weren't doing much, so I made my own with 3" extensions as well.
I cleaned it up, and took a few photos down at the local track afterwards.
Stock splash guard
Splash guard removed
New splash guard vs. stock
New splash guard during flexing
Without gap guard
With the new gap guard
PS of my favorite shot of the day
#5
Join Date: May 2005
Location: Jackson, New Jersey
Posts: 4,872
Likes: 0
Received 0 Likes
on
0 Posts
looks good john! how is the house hunt coming?
looks like your headers have leprosy
nice PS... you use the brush tool with reveal all layer or cut it out?
Thread
Thread Starter
Forum
Replies
Last Post
Jwad00
General Technical & Electrical
15
07-06-2010 05:06 AM