Need Help from owner of 84 Ranger XLT Possibly
#1
Need Help from owner of 84 Ranger XLT Possibly
****SOLVED THE WIRING PROBLEM***Hi there , posted "the Problem " n a possible solution in Electrical .No responses.Try here. I need assistance color coding WHICH WIRE should attach from the bottom Terminal post ,in the lower Plastic Module ,on each Terminal inner/outer Level by Level then the same for the upper plastic module.This is for the signal light mechanism on the steering column.All the wires were removed from the terminal posts and put back in .It is not 100%,correct and I need to have help identifying which wire belongs on which post. There are only Two long screws that pull the upper and lower steering column covers/shrouds together,maybe some one might take their covers off and note the colors of the wires going into the back of the module below the signal light/horn/high beam Lever and again above the Lever and get back to me with a list of the placement/color wires on this ,that I can get the use of the truck ,a little more quickly.I have been working /waiting going on 16 days between the last repair and now this one. Thank you in advance for the consideration .
Last edited by glassstarfish; 12-08-2010 at 04:27 PM. Reason: Solved the wiring issue on the signal light multi function switch
Thread
Thread Starter
Forum
Replies
Last Post
Mykhael
General Ford Ranger Discussion
17
08-06-2009 03:31 PM