I need to change brake pads on the front of the truck this weekend, and I got to looking. It actually cost less for brake pads than I thought.
I have the 31 spline Fx4 axle what all do I need to convert it over from drum to disc brakes?

Hopefully Alon has some of the stuff I need

Im not gonna waste my time at a junk yard Im just gonna buy brand new stuff.

 

member Bill (04lvl2) did this with a Ford racing kit.. need some hoses extra and i think parking brake cable also

 

I used the little search thingy and found his thread on it

Still wanna know if there is any other kits out there.

https://www.ranger-forums.com/forum2...ad.php?t=21614

 

its a very good kit and not that expansive..

had the pleasure of driving his truck often it stopped very well.. lets just say if i had a 31 spline i would have already ordered it

 

http://www.ssbrakes.com/products/det...4WD)&year=2003

I'm not sure if it will work for the 31 spline.

 

Bill bought Ford Racing M-2300-G which is nothing more than the factory rear disc parts from a second generation Explorer assembled into a kit. The Gen2 Ex brake components are a bolt on to the 31-spline FX4 axle flanges but the axle shafts have to be pulled out first to install the plates. We used 2 passenger side Explorer rubber brake hoses and shortened and reflared the hard lines along the axle tubes. The p-brake cables were shortened later.

http://www.fordracingparts.com/parts...tKeyField=1790