|
Disconnected Cable
Just opened the engine to add windscreen wash and notice this cable was disconnected - I've reconnected it now :33:.
Any ideas what it's for or why it would be disconnected? - most likely after being in for a service as I haven't disconnected anything. https://cimg3.ibsrv.net/gimg/www.ran...739233c93d.jpg JB3T-14G346 |
To be clear..You opened the hood or bonnet not the Engine. There are two cables, Which one was disconnected?
|
Originally Posted by RoseBud68
(Post 2221700)
To be clear..You opened the hood or bonnet not the Engine. There are two cables, Which one was disconnected?
Cable that was disconnected was the furthest away one labelled JB3T-14G346 AB https://cimg4.ibsrv.net/gimg/www.ran...dd554a52f.jpeg |
Its for turbo air inlet so most likely an air temp sensor if its just 2 wires
You have a T6 Ranger which we, in North America, could never get or even import Our Rangers were smaller and 1983 to 2011 model years, no Diesels or turbos, well 1983-1985 had diesel option Try Australian Ranger forums, they also got the T6 models and forums are in English, lol |
Originally Posted by RonD
(Post 2221718)
Its for turbo air inlet so most likely an air temp sensor if its just 2 wires
You have a T6 Ranger which we, in North America, could never get or even import Our Rangers were smaller and 1983 to 2011 model years, no Diesels or turbos, well 1983-1985 had diesel option Try Australian Ranger forums, they also got the T6 models and forums are in English, lol |
| All times are GMT -6. The time now is 10:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands