|
Dont like Rack and Pinion? Swap it out.
http://www.explorerforum.com/forums/...d.php?t=181266
I thought some of you guys might find that thread interesting. Its being done on an Explorer, but the frames the same up front for the most part. He is actually the guy I sold my RCD lift to back when I took it off. |
reviving an old thread.....i think i might look into doing this. my rack is shot and this looks very feasible. plus it would make a sas go tons faster if this were done beforehand
however, i dont like how he put the steering box on the inside. i dont know how he got it to fit. AND he is putting a 5.0 in there. you think this would work by using a steering box that goes on the outside of the frame? maybe like a 2wd chevy ifs setup... |
the page won't load, but i don't see why it wouldn't work.
|
loaded for me. i might go measure my buddies yota ifs setup and see how that would swap over. because that cant be too much of a difference in width compared to the rangers. yea itll be a little bit different but its got to be closer than what he pulled off that f150
|
VERY neat!
|
after having that style stearing i would never want to sway to it. if i was someone else the parts wear out and the stearing gets really sloppy
|
...what?
|
Originally Posted by 99ranger4x4
(Post 1300134)
...what?
|
be nice to make these trucks turn easier at 10mph and below, sucks backing out at the malls and stuff in town... moms fusion kicks arse turning :-)
|
their not that bad to turn?
hell a yoda IFS box on stockish tires would kick ass. |
idk how he got that to fit. and i dont see a motor in there yet, but still idk how it fit.
|
Originally Posted by zabeard
(Post 1300376)
idk how he got that to fit. and i dont see a motor in there yet, but still idk how it fit.
|
you can barely get the yota box on the outside where you want it on a SAS. Let alone on the inside.
|
yea, i think i might see if i can use a chevy 2wd box. it lays flax instead of sticking up and might be able to lay along the frame better than the yota box.
|
Originally Posted by zabeard
(Post 1300878)
you can barely get the yota box on the outside where you want it on a SAS. Let alone on the inside.
Originally Posted by shadow905
(Post 1300886)
yea, i think i might see if i can use a chevy 2wd box. it lays flax instead of sticking up and might be able to lay along the frame better than the yota box.
|
| All times are GMT -6. The time now is 11:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands