General Ford Ranger Discussion General discussion of the Ford Ranger that does not fit in any other sub-forum.

Extremely rough idle, and stalling...

Thread Tools
 
Search this Thread
 
Old May 7, 2010
  #1  
FMD's Avatar
FMD
Thread Starter
|
Member
iTrader: (1)
Joined: Aug 2005
Posts: 3,877
Likes: 6
From: Amherst NY
Extremely rough idle, and stalling...

My 95 e350 small block V8 (not the ranger) is having major issues right now. It runs exceptionally rough, and stalls. give it gas and its 'ok' but still stumbles a bit.

Spark is good, and fuel is fine. We found out that tapping on the EGR control thingy, that the truck, idled great, so we bought a new one of those. Installed it, and then the truck wouldnt start at all...

Finally after actually putting it completely back together (it was just sorta sitting there) it started...after discovering that a wire, (i forget what its called, it comes off the distro, its the 9th wire, goes to something else.) anyways that fell apart so we replaced that... anyways the problem still exists. A good friend of mine, spoke to a friend of his, who thought it maybe the EGR itself, so we took that off, and visually inspected it, however have no way to test it... any ideas? A new one is $90. I cant afford to keep throwing new parts at this thing... yet I need the truck for work.

Any ideas?
 
Reply
Old May 7, 2010
  #2  
David N's Avatar
Member
Joined: Dec 2008
Posts: 1,060
Likes: 0
From: Williamston, NC
Sounds like a vaccum leak. Now finding it is a real problem though...
 
Reply
Old May 7, 2010
  #3  
old87ranger's Avatar
Member
Joined: Mar 2010
Posts: 237
Likes: 0
From: white oak tx
no telling is the check engine light on
 
Reply
Old May 7, 2010
  #4  
Sonic04Edge's Avatar
RF Veteran
iTrader: (6)
Joined: Jun 2004
Posts: 5,718
Likes: 1
From: Madison. AL
Could also be the IAC vavle.
 
Reply
Old May 7, 2010
  #5  
old87ranger's Avatar
Member
Joined: Mar 2010
Posts: 237
Likes: 0
From: white oak tx
make a video that will help us alittle
 
Reply
Old May 11, 2010
  #6  
FMD's Avatar
FMD
Thread Starter
|
Member
iTrader: (1)
Joined: Aug 2005
Posts: 3,877
Likes: 6
From: Amherst NY
Ugh this truck... im ready to take it to a shop...

im starting to think i should replace all the vaccume lines as well, that thought actually crossed my cranium.

So far I put $90 into this thing and its ntill not fixed, while it no longer stalls in park, it now wants to stall in gear. >:(

I put an ew IAC valve in it, and an EGR regulator in it... the egr valve checks out as 'ok'

I also think I may need a new mechanic friend hes dead set on it being a fuel problem... his idea: drop the gas tank which has 35 gallons of fuel, and replace the fuel pump...

My othe mechanic friend has so far sided with everyone else as it being a vacuume leak...
 
Reply
Old Jul 8, 2012
  #7  
Pless2012's Avatar
Member
Joined: Dec 2011
Posts: 3
Likes: 0
From: Blue Ridge, Georgia
the egr valve could have carbon built up. you can take it off and spray brake cleaner or something thru it and it could help get the carbon off.
 
Reply
Old Jul 8, 2012
  #8  
Red_Ak_Ranger's Avatar
RF Veteran
iTrader: (1)
Joined: Oct 2004
Posts: 17,221
Likes: 4
Originally Posted by Pless2012
the egr valve could have carbon built up. you can take it off and spray brake cleaner or something thru it and it could help get the carbon off.
Maybe if you had a time machine to 2010 this advice would be helpful for him lol.
 
Reply
Old Jul 10, 2012
  #9  
Pless2012's Avatar
Member
Joined: Dec 2011
Posts: 3
Likes: 0
From: Blue Ridge, Georgia
Very True. ha
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ChargerOnDavins
2.9L & 3.0L V6 Tech
4
Oct 12, 2023 03:37 PM
mopar9012
2.9L & 3.0L V6 Tech
9
Mar 19, 2016 02:33 AM
whiskeybreath
SOHC - 2.3L & 2.5L Lima Engines
1
Nov 27, 2014 04:06 PM
mmelton
General Technical & Electrical
5
May 25, 2014 08:05 AM
ccernst
Suspension Tech
0
Sep 10, 2009 12:50 PM




All times are GMT -6. The time now is 05:31 AM.