Good Kinda cheap place to get blacked out headlights.......etc
Thread Starter
|
Member
Joined: Oct 2005
Posts: 3,262
Likes: 1
From: Havre De Grace,Md
Originally Posted by Rolldogg
Awesome tails........just what I have.....LOL
I also seen those with some Nightshade on them.......very cool indeed.
I also seen those with some Nightshade on them.......very cool indeed.
Member
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
Originally Posted by fletch12518
OOOOOOO Ok. My fogs now have been disconected from the factory spot and I ran my own relay and fuse, 10 guage wire, etc. So I can run with my fogs on with high beams on now as it is........
Member
Joined: Oct 2006
Posts: 1,722
Likes: 0
From: US Army
these are the tails i bought off the most wonderful site ebay...i am supposed to get them delivered today (its been 3 weeks) if for some reason they dont fit ill sell them to you exactly what i paid for them..i was on the black out mission too but with my chrome valance and some other things i just started to do the best i could and compliment those with the clear corners and things like that
Thread Starter
|
Member
Joined: Oct 2005
Posts: 3,262
Likes: 1
From: Havre De Grace,Md
Originally Posted by REUBER
these are the tails i bought off the most wonderful site ebay...i am supposed to get them delivered today (its been 3 weeks) if for some reason they dont fit ill sell them to you exactly what i paid for them..i was on the black out mission too but with my chrome valance and some other things i just started to do the best i could and compliment those with the clear corners and things like that
Member
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
those should fit.....the step side and regular side bed are the same lights in STOCK lights....but aftermarket lights have something different about them as far as aftermarket lights that dont allow both bedsides lights to be swapped...
Member
Joined: Oct 2006
Posts: 1,722
Likes: 0
From: US Army
yeah im a little worried, they said they wouldnt fit but i consulted the R-F squad and they all said they should fit. its hit or miss so i trusted them but if they dont fit im sucking!!!!! and youll see them in the Members Classified section
Member
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
Originally Posted by fletch12518
dont the newer rangers have a 2 bulb set up? not three like ours? Please correct me if im wrong by all means
Thread Starter
|
Member
Joined: Oct 2005
Posts: 3,262
Likes: 1
From: Havre De Grace,Md
Originally Posted by REUBER
the description for these was 02,03,04, 05 lights..now i am really wondering.....i thought the same with the set up
Thread Starter
|
Member
Joined: Oct 2005
Posts: 3,262
Likes: 1
From: Havre De Grace,Md
Originally Posted by lifted97ranger
you could always get another socket and T tap the brake/turn light and add another so you have 2 brake/turn lights....
Shane, you dont have to worry about that.....
Shane, you dont have to worry about that.....
Yeah, No I knew that. Mine will be lug and play and splicing into the "BROWN" wire lol
Member
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
^^^yours is not a plug and play.....you will have an empty hole that either needs to be filled......you will have to get another brake/turn light socket and wire it into the factory socket so you can plug it in....
Member
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
let me do one for you now....
1. find a brake/turn socket for your year truck that has a couple inches of wire left...
2. use splice connectors and connect them to the same color wire on the plug that came with your truck orgionally....(you will have to extend the wires from the new socket so they will reach)....
3. Double check to make sure everything works properly...
4. use electrical tape to seal the connections...
5. Install the sockets in the proper holes....
6. Install the tailights in the bedsides with the 4 screws....
You now have completed the extra brake/turn light socket on your truck.....
it aint too bad......
1. find a brake/turn socket for your year truck that has a couple inches of wire left...
2. use splice connectors and connect them to the same color wire on the plug that came with your truck orgionally....(you will have to extend the wires from the new socket so they will reach)....
3. Double check to make sure everything works properly...
4. use electrical tape to seal the connections...
5. Install the sockets in the proper holes....
6. Install the tailights in the bedsides with the 4 screws....
You now have completed the extra brake/turn light socket on your truck.....
it aint too bad......
Member
Joined: Nov 2005
Posts: 1
Likes: 4
From: Charlestown, IN
Originally Posted by REUBER
youre the man Maurice!
do i have to do this though? it doesnt go without the extra?
do i have to do this though? it doesnt go without the extra?
you could just seal the back up with electrical tape and forget about it, but i dont think that would look good...
Member
Joined: Aug 2005
Posts: 1,836
Likes: 11
From: Lowell, AR
I have a How-To over on Ranger Power Sports, but since Matt is one cool dude, I no longer have access to it. Feel free to go over there and search for it. Let me know if you don't find it and I'll make a new one and post it here!
It's really simple. Just a matter of squeezing together some quick-taps and wrapping it with tape!
It's really simple. Just a matter of squeezing together some quick-taps and wrapping it with tape!
