When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
After pulling the front wheel and caliper off my '03 Ranger 4x4, the rotor and wheel hub move, alot! The nut in the center of the wheel hub is tight and hub and rotor all move together. The play is in the area covered by a boot on the wheel side of the front 4x4 axle. See photo.
Before I take anything else apart I could use some advice (on fixing the problem)
OK, It appears to be the wheel bearing. Funny, after being told by Tire Kingdom I needed brakes, rotor, caliper, upper control arms and Ball joint they overlooked the real problem.
