Im Confoosed
#1
Im Confoosed
Can someone help me interpet this chart? Im just trying to figure out if 32's will fit on my ranger but I dont really know how to read the chart.
Sorry for it being so big but it has to be big to read it. If the link doesnt work I found it on 4wheelparts while looking at tires.
Hopefully someone can help me out here.
Thnx,
Stephen
Sorry for it being so big but it has to be big to read it. If the link doesnt work I found it on 4wheelparts while looking at tires.
Hopefully someone can help me out here.
Thnx,
Stephen
#4
ok an a 3rd gen xlt 2wd you will need a Add-a-leaf and a FRONT leveling block here is the BEST block you can buy it comes with the 3" longer replacement grade 10 bolt also and 99% of the other one's on the market will not come with it. after an add-a-leaf and the front 2" block you can came 32x11.5x15 in there easly
http://www.suspensionconnection.com/...F09101F4L.html
http://www.suspensionconnection.com/...F09101F4L.html
#5
#7
also after you get the front lift block in take it to the alignment shop right away should run you around $100ish because it needs the cam blocks after that. should be the 2 1/4 blocks but the shop will take care of that for you. as for the add-a-leaf's someone on here should be able to get you the part # or you would use a 3" lift block in the back being that yours shouldnt have one at all. and the lift block will get you 1" more lift and also not change the ride as the add-a-leaf might make it ride harder. also you will ned 2" longer shocks in the front and the back you could get like 2003 edge 4x4 rear shocks will work
#9
#10
Originally Posted by Businessman52
Hey there I knowfor a fact that 32's will not fit, I have a 94 running 33's and they would rub with a three inch body lift if you jumped a curb, I have 5.5 inches of suspension as well and well now it is just a beast but I can tell tell you that they wont fit,
andrew
andrew