lift list
k got shackles and add a leaf and spindles what else do i need ? lol i want to know ALL of it :grouphug:
|
grease, tools, time, patience, refreshments
|
make sure you repack your wheelbearings and replace the seals... very cheap for te parts... it would be a good idea to replace all of the cotter pins you will be removing during the install... good luck
|
Originally Posted by gatorblue92
make sure you repack your wheelbearings and replace the seals... very cheap for te parts... it would be a good idea to replace all of the cotter pins you will be removing during the install... good luck
|
might as well do ball joints as well
|
go ahead and do a BL too.
|
Originally Posted by anthony84_2004
go ahead and do a BL too.
|
Might as well get it all at once. Your' never done modding, I tried to stop, but it ai'nt happening.
|
lol ok ok but i am not kidding waht is everything i need to instal this thing ?
|
dont rush it just to get it done make sure it is done right take your time
|
lol i got my stuff from summit but not the spindals
|
b to da ump
|
there really isnt too much else you will need besides tools and jacks... just be sure to take your time... not sure if you got a fabtech or not but these instructions should help alot http://www.fabtechmotorsports.com/pd...on%20Sheet.pdf
|
i got the supenion max ons will the grinding be the same with those as the others ?
|
when ya doing this? where?
|
i hope you know a decent amount, you'll probably need new brake lines, and try and do some drilling or something to put the dust guards back on, grinding is a must. make sure you adjust the abs sensor just right where it doesn't hit and there isn't too much gap. make sure you bore out the holes on the spindle first.
other than that.. good luck! |
Originally Posted by doug435
i got the supenion max ons will the grinding be the same with those as the others ?
|
yea grinded down a little, i didnt touch my brake lines, they were fine...and i dont know what holes black-n-blue is talking about...i didnt bore out anything...im assuming he meants boring holes for the dust shields...i didnt put mine back on...
|
when TBA where TBA and how i have no clue :footinmou but um ya lol my rear spakers went out and yesterday i got rear ended and then all this stuff is happing so we will see
|
wow...that freaking sucks...hope everything gets worked out ASAP and your truck is up in the air quick quick quick
|
give me some cash for an air tool set from HF and we can do this at my house.
|
i got a set of air tools and i think my dad and his friend for the ford dealership are gonna do it ... but i dont know lol this week sucks :headache: :tapedshut
|
Originally Posted by RangerJustin
grease, tools, time, patience, refreshments
LOTS of refreshments. Oh, and you'll need Chevy shackles for the rear.....trust me on this. Ask anyone here with a Fabtech lift kit. |
Originally Posted by aftermarket
LOTS of refreshments.
Oh, and you'll need Chevy shackles for the rear.....trust me on this. Ask anyone here with a Fabtech lift kit. yup yup...the chebby shackles should give you somewhere between a 1/2" to 1 1/2" extra lift in the rear depending on springs...not sure on that, but i am sure if you don't put them on your ass will sag lower than the front.... they're like 46 dollars from summitracing.com |
Yep, lift kit and just AAL's isn't enough. Do a search here on RF, you'll find the part # for Summit quite easily.
|
All times are GMT -6. The time now is 08:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands