Installed BL, rims, & tires
#1
#5
It took about 14 hours to install doing it by myself and it was my first time. It turned out I was missing some nuts and bolts so in the middle of the install I had to hunt down those parts. When my spray in bedliner was installed they sprayed over the bed bolts. I spent about 2 hours carefully cutting the bolts out trying not to mess up the spray in liner. I got really lucky on the cab bolts. I didnt spray them with wd-40 or anything and I only had to have someone hold 1 of the 4 bushings. Oh and the metal pipe for the fuel filler was an incredibly tight fit, I really think it was the wrong size. The metal pipe for the vapor line would not fit. It was the same size as the rubber line itself, so I had to go to the auto parts store and get a piece of brake line. Other than those problems it went smooth.
#6
#9
#10
#12
Originally Posted by 03DualSport
Thanks for the compliments. I really do think it looks different, but in a good way. It looks exactly like I wanted it to. Question for you that have done a bl, did your steering get tighter, even before you put on bigger tires?
i think mine might have but im not sure its been so long.
#19
#20
Originally Posted by 05RangerXLT
My steering changed a bit, I can't really describe it. I know personally mine makes a little noise now, creaks from the steering column. I think its just because of the extension. Same with the shifter boot, more noise from the shifter since I'm a 5spd.
#23
#24