possible recall? need ford employees
my 07 might be having some problems... the valve stems especially the rear ones seem to keep losing air over a 3-4 month period, well I go to leave today low and behold my TPS is on, so I go and check all the wheels, I get 29.5, 31.2, 32, and one of the tires won't read I tried 2 different gauges to check... my digi gauge says 0psi the tire is cupping really bad, the old school gauge says 10 psi... I can basically go out there and squeze it... I'm starting to think its the valve stem because there is always one tire that goes down a lot every 3 months...
what I wanna know is, was there a Ford Recal on these valve stems or tires??? |
Cody....alot can happen in 2 years time to tires.... sticks, screws, wear, etc. I'm not seeing any valve stem recalls or TSB's for a '07 Ranger.
|
none that i see.
|
did the soapy water test around the whole tire looks clean...no air bubles
|
From Ford? I couldnt find anything. There was a HUGE valve stem recall that you might want to look into though.
Another Valve Stem Recall Launched: aftermarket News |
need to inspect those lil buggers...
I have a job interview at 5pm tomorrow, so i hope I can get this crap fixed. |
Check them once a week. 10psi is going to phuck your MPG and your tires quick.
|
i've been lucky, mind you mine is an 08' the only time my light came on was in the winter and that is common up here cuz air pressure drops in the cold.
|
could be your valve cores... thoose just thread in and out but you have to have the right tool, and new cores. tire places will have them and its cheaper to start there than new tires. you could do the same soapy h2o test but in the stem its self, as goes for around the stem as well
|
looks worse this morning going to the dealer...
|
I know explorers have a valve stem problem
|
try soapy water in a spray bottle, and if you wanna check the valve core just air it up and put some spit on your finger and then apply it to the valve core to see if it bubbles
|
fixed... checked those stems they were not the recalled DILL brand... working in daylight helped me find a nail in there, got it plugged and I'm good to go... also found out that with the TPS system I don't need to run those fancy chrome stem covers because they will corrode overtime and stick to the threads, not cool...
|
TPMS systems FTL
|
Originally Posted by edgeman4.0
(Post 1432372)
TPMS systems FTL
|
Do you have rubber valve stems or bolted in TPMS sensors?
If you have the DILL brand of valve stem, just head over to discount tire and get them replaced and they will get you a form to send in to DILL to get reimbursed. |
I saw on the news a few mnths ago that ford was goin to do a recall on ALL 07+ valve stems on ALL ford vehicles. There have been several related accidents and law suits againts ford for that reason related to the bad valve stems that would leak air or just let go!! I would check with your local ford dealer and see. 09bamaranger took his in and said they did have a recall on the stems but did not have a TPS out on it.
|
I'll check on it next time I get the oil changed, I checked the stems and they look really good, glad my tire is fixed!
|
Originally Posted by hozII
(Post 1432392)
I saw on the news a few mnths ago that ford was goin to do a recall on ALL 07+ valve stems on ALL ford vehicles. There have been several related accidents and law suits againts ford for that reason related to the bad valve stems that would leak air or just let go!! I would check with your local ford dealer and see. 09bamaranger took his in and said they did have a recall on the stems but did not have a TPS out on it.
It wasnt Ford's fault. Technically, it was DILL, a valve stem manufacturer, that was at fault. Many places were proactive in replacing these valves stems free of charge when DILL was denying anything and everything about it. Finally, DILL was forced to issue a recall on all valve stems manufactured between August of 2006 and July of 2007. You should thank Ford, Discount Tire, and many other places for staying proactive towards these things when DILL was trying to avoid it. Ask me how I know...I was there |
valve stems
just google "tire valve stem recall" theres 30 million made in china defective stems out there.
|
Yeah I got a piece of mail from ford last week talking about this recall.
|
WINDEX! Its what we use at work for looking for leaks. Since it is a soap product it bubbles. Spray it on and look for bubbles.
Originally Posted by GrafixGuy
(Post 1432368)
also found out that with the TPS system I don't need to run those fancy chrome stem covers because they will corrode overtime and stick to the threads, not cool...
Bolt-on TPMS sensors are a different story, but you dont have to worry about that.
Originally Posted by ohiodave54
(Post 1433561)
just google "tire valve stem recall" theres 30 million made in china defective stems out there.
|
double post
|
This must be the reason one of the valve stems began leaking from when I got new tires in 07. I usually don't get new valve stems when I get new tires but the tire dealer talked me into getting new ones installed. When I brought the truck back in this year because of the leaking valve stem they decide to change them all. Maybe they knew about the valve stem recall.
|
Originally Posted by edgeman4.0
(Post 1432372)
TPMS systems FTL
|
All times are GMT -6. The time now is 12:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands