What model is my 2007 ranger?
#1
What model is my 2007 ranger?
Hello I just bought a 2007 ford ranger 2.3L 5 speed snd reg cab 2wd in Canada. And the registration dos not have any model for it Exp: XL,STX,XLT,Sport Ect Just looking around seems like if I had to get any parts all the data bases want a model. What one should I use. What one is the bottom line truck for 2007 as I think that is what this one is. Its a plan Jane reg cab truck no frills at all.
Thx
Gary
Thx
Gary
#2
#3
Isn't the model indicated by one of the letters (or numbers) in the VIN? Or perhaps on the decal located in the drivers door jamb?
Try entering your VIN in this link (says it's good back to the year 2000):
http://www.fleet.ford.com/maintenance/vin-decoder/
Try entering your VIN in this link (says it's good back to the year 2000):
http://www.fleet.ford.com/maintenance/vin-decoder/
#5
^agreed there is a lot of overlap on features between the two packages body moulding color or decoding the VIN are the most accurate ways to tell because a lot of the fleet trucks were special ordered with or without certain options so there is not really a standard for features determining the trim package. For some reason Ford is under the impression that turning everything chrome from the 80's is an upgrade lol.
#8
Vin worked yes and no
Isn't the model indicated by one of the letters (or numbers) in the VIN? Or perhaps on the decal located in the drivers door jamb?
Try entering your VIN in this link (says it's good back to the year 2000):
VIN Decoder | fleet.ford.com
Try entering your VIN in this link (says it's good back to the year 2000):
VIN Decoder | fleet.ford.com
#12
The other problem can be that if it was bought used from a dealer lot or used vehicle lot once in its lifetime, there's no telling what a previous owner did to it, from a parts swap point. Maybe someone added a trim part from the salvage yard to change its appearence, so that could through you off.
Myself, I have a 2000 XLT, and dislike the chrome front grill. I plan to replace it with a blacked out one. I think the chrome is a bit too much on the front. If this truck ever makes it to a new owner (no plans for that), it might make them wonder what trim model it is.
You do have a nice, clean Ranger there. Its a beauty!
Myself, I have a 2000 XLT, and dislike the chrome front grill. I plan to replace it with a blacked out one. I think the chrome is a bit too much on the front. If this truck ever makes it to a new owner (no plans for that), it might make them wonder what trim model it is.
You do have a nice, clean Ranger there. Its a beauty!
#14
#15
Yeah trim package only really matters when ordering trim or appearance parts. The mechanical stuff is about 99% the same on all packages so as long as you have engine and trans combo correct trim level won't matter much I have ordered parts under edge xl and xlt for my XLT ranger and haven't had any fitment issue. Your clunk is probably ujoints on the way out you get slop in the drive shaft that makes a clunk when it goes from unloaded to loaded.
Thread
Thread Starter
Forum
Replies
Last Post
08jeff
General Ford Ranger Discussion
30
02-21-2009 10:22 AM
LILBLUE04FX4L2
Ranger Products, Company, & Member Reviews
7
10-25-2004 07:39 AM