Unknown part
Thread Starter
|
Member
Joined: Mar 2020
Posts: 2
Likes: 0
From: Leander
Unknown part
Its located on the bell housing, has a plug screw in it and it appears to be hard rubber. I googled every number on it, closest i could find was a valley plug, but no photos could confirm.
Last edited by KlintP; Mar 27, 2020 at 07:49 AM.
So you have a 5R44E automatic transmission in a 2009 Ranger, which is the same as 4R44E or A4LD
Picture of drivers side here: https://shiftritetransmissions.com/w...55E_001-20.jpg
Picture of passenger side here: https://encrypted-tbn0.gstatic.com/i...ebjeNZcoIVRUME
Top here: https://encrypted-tbn0.gstatic.com/i...FkUa0eXGOBmPzS
So where on the bell housing is it?
The tube that runs up and down is the vent hose for the transmission
Picture of drivers side here: https://shiftritetransmissions.com/w...55E_001-20.jpg
Picture of passenger side here: https://encrypted-tbn0.gstatic.com/i...ebjeNZcoIVRUME
Top here: https://encrypted-tbn0.gstatic.com/i...FkUa0eXGOBmPzS
So where on the bell housing is it?
The tube that runs up and down is the vent hose for the transmission
Thread
Thread Starter
Forum
Replies
Last Post
