WTF?!?!?!? If you want something done right... do it yourself!
I have had a on going problem with my air vents. They blow out of the defrost all the time. The place that HELPED me do my body lift, did about %50 of the labor. After a couple of days my ac/heat started only blowing through the defrost vent on top of the dash.... So I took it in and they said "Oh, A vacuum line came unplugged" well 1 year later it starts doing it again. I pull the gap guard, splash guard and come to find out the Jacka$$ that put the gap guards on my truck drilled a F*ing hole in my AC/Heat vacuum control module (looks like a softball with two hoses hooked up to it) and put glue in it to seal it up!!!!!! Its on the passenger side splash guard and after working with it for 3 hours it is almost sealed. I have to find the part number and go get a new one tomorrow. I have been without vent A/C for 3 months and I'm pissed. There is a 1/4 inch hole in it filled with glue... that prick is getting an earful tomorrow... now I remember why I do my own work. GRRRRRRRRRRRRRRRRRRRRRRRRR. Ill post pics of this BS tomorrow... Im so tired and cranky... seriously guys. Think before you drill. smiley_chicken
|
some people really need to be slapped. I find slapping people much more degrading lol. I guess you live and learn bro
|
Originally Posted by jeweler54
(Post 1428292)
seriously guys. Think before you drill. smiley_chicken
and NEVER drill too deep, otherwise she'll never leave you alone. words to live by from my father.lol |
Originally Posted by edgeman4.0
(Post 1428298)
and NEVER drill too deep, otherwise she'll never leave you alone. words to live by from my father.lol
|
thank you sir.lol
|
so thats what that thing is......damn its so obvious i wish i could move it....
|
Originally Posted by The S-10 Killer
(Post 1428317)
so thats what that thing is......damn its so obvious i wish i could move it....
|
Originally Posted by jeweler54
(Post 1428319)
just be careful with it. LOL... it's sensitive to idiots with a drill!
|
Originally Posted by country346
(Post 1428322)
LOL If I quoted people in my sig this would be there. This is exactly why I do evertyhing humanly possible myself the only thing I will not touch is the trans.
|
Ive been lurking in the shadows, its what I do best, thanks for asking Ben.
Seriuosly who the hell drills a whole through something like that, and I hope they make it right for you. |
good thing they dont keep infants behind fenderwells
|
this thread is full of sigs
|
Originally Posted by country346
(Post 1428332)
Ive been lurking in the shadows, its what I do best, thanks for asking Ben.
Seriuosly who the hell drills a whole through something like that, and I hope they make it right for you. |
Originally Posted by The S-10 Killer
(Post 1428335)
good thing they dont keep infants behind fenderwells
|
Originally Posted by The S-10 Killer
(Post 1428335)
good thing they dont keep infants behind fenderwells
|
Originally Posted by jeweler54
(Post 1428337)
See, Heres the problem. Instead of waisting my time blaming them, Ill just replace the part and pull the HUGE 4Wheelconcepts decal off my truck... its won three shows and gets countless comments. its there loss. I asked them to make it right and they said "Well you probly did it wheeling..." Problem is I dont wheel this truck that much. oh well. Next time they need something from my jewelry store... price goes back to retail:tapedshut
|
Originally Posted by jeweler54
(Post 1428337)
See, Heres the problem. Instead of waisting my time blaming them, Ill just replace the part and pull the HUGE 4Wheelconcepts decal off my truck... its won three shows and gets countless comments. its there loss. I asked them to make it right and they said "Well you probly did it wheeling..." Problem is I dont wheel this truck that much. oh well. Next time they need something from my jewelry store... price goes back to retail:tapedshut
|
WOW...that 'ball' thing has plenty of clearence even when drilling for gapgaurds. Guess the user of the drill was a complete idiot huh? That ball thing is just dangin' in my fender right now actually.
|
Originally Posted by Fx4wannabe01
(Post 1428366)
WOW...that 'ball' thing has plenty of clearence even when drilling for gapgaurds. Guess the user of the drill was a complete idiot huh? That ball thing is just dangin' in my fender right now actually.
|
Originally Posted by Fx4wannabe01
(Post 1428366)
WOW...that 'ball' thing has plenty of clearence even when drilling for gapgaurds. Guess the user of the drill was a complete idiot huh? That ball thing is just dangin' in my fender right now actually.
Originally Posted by mossyoak03
(Post 1428389)
hahaah me too me too.
|
Wow that's screwed up.
Back before I did much of the work myself, I had my dad's friend's son install a DJM 4/5 on my 98. He's certified and runs his own shop, yada yada yada. I specified that he needs to install the camber kit when he installs the drop kit, and also to align the front end enough for me to drive it home. Not only did he not install the kit, but he didnt align the front end either. Then he tried to charge me $800 for the install LOL. Then a few months later I wonder why the sway bar links were at such a bad angle. He had taken the sway bar off, turned it upside down, and reinstalled it upside down. There were a few other questionable things that he did., that i dont remember off hand. Moral of the story, take it to a reputable shop, or do it yourself. |
Originally Posted by jeweler54
(Post 1428575)
Anyone know what part that is so I can buy a new one? I can't find a part fisch that has a pic of one
EDIT: nvm i don't even have one of those things lol |
I've never had anything installed for me. I prefer to be responsible even if that means i'm going to Napa to buy a 150$ part.
|
That's what that ball is. It's been sitting next to my window washer fluid ever since i got the truck with one and a half wires hanging from it. Now i know! Fixing!
|
jeweler I have around somewhere, let me go double check. Ill send you a PM.
|
All times are GMT -6. The time now is 05:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands