Ranger-Forums - The Ultimate Ford Ranger Resource

Ranger-Forums - The Ultimate Ford Ranger Resource (https://www.ranger-forums.com/)
-   General Technical & Electrical (https://www.ranger-forums.com/general-technical-electrical-18/)
-   -   Brake Upgrade for 99 (https://www.ranger-forums.com/general-technical-electrical-18/brake-upgrade-99-a-79428/)

84socal 02-05-2009 11:16 PM

that was a short 40 in red lable krawler i made my *****
btw those where a ***** to mount with out a tire machine

sam24462 02-06-2009 08:02 AM


Originally Posted by 84socal (Post 1202025)
that was a short 40 in red lable krawler i made my *****
btw those where a ***** to mount with out a tire machine

It looks like you mounted it just fine :crazy:

sam24462 02-09-2009 04:11 PM


Originally Posted by Earl43P (Post 1200944)
99% of the "my front brakes are too grabby" gripes I've fixed with either new rear shoes or new adjuster wheels.

Does your parking brake hold if you:

push it 1/2 of its travel distance to the floor

and put in drive or let out the clutch?

In other words, check/adjust/replace your rear shoes / adjusters.

Another way to confirm my diagnosis is to drive down the road, press the parking brake until you can feel it having a braking effect, THEN press the foot brake and see how grabby the fronts are. My bet is you'll see a big difference. Fix the rears!

If your parking brake goes completely to the floor, again = bad rears.


Seriously.


Fixed the problem!

I tried braking with only the emergency brake and they were a mess. I replaced the shoes about 20k miles ago so they still looked new. I decided to replace everything in the rears. It was about $170 down at Autozone. Took about 2 hours and a little adjusting but now they work perfect!

Earl43P you are the man!:notworthy


All times are GMT -6. The time now is 08:13 PM.


© 2024 MH Sub I, LLC dba Internet Brands