clutch pedal problems
Thread Starter
|
Member
Joined: Jan 2008
Posts: 1
Likes: 0
From: Mt Washington, KY
clutch pedal problems
does any one have any ideas on what could cause this?
the pedal is coming almost all the way to the top before it is releasing. the clutch disc, flywheel, presureplate, throwoutbearing/slave cylinder have less than 30000 miles on them.the slave cylinder has plenty of fluid and has been bled. any hel would be apreceated.
the pedal is coming almost all the way to the top before it is releasing. the clutch disc, flywheel, presureplate, throwoutbearing/slave cylinder have less than 30000 miles on them.the slave cylinder has plenty of fluid and has been bled. any hel would be apreceated.
"only 30000 miles"
Yea......so Bob's first one last 15k. My second slave lasted under 10k. I'm on my 4th slave w/ about 5k on the clock.
I'd first check your clutch master cyl before you start looking at the slave. I don't know the symptoms of a bad clutch master cyl, but what you are describing sounds like a classic slave cyl prob.
Yea......so Bob's first one last 15k. My second slave lasted under 10k. I'm on my 4th slave w/ about 5k on the clock.
I'd first check your clutch master cyl before you start looking at the slave. I don't know the symptoms of a bad clutch master cyl, but what you are describing sounds like a classic slave cyl prob.
Thread
Thread Starter
Forum
Replies
Last Post
shaunng69
General Technical & Electrical
1
Jul 18, 2025 06:44 AM
