electirc fan questions.
Brighton! Dang.. I'm in Howell.
Up here in Mich you won't really see too much because of the temps we see. Most of the time up here it's freewheeling.
I've done a fair amount of bolt on's and drive from Howell to Ply everyday. So far the Bama tuner and underdrive have netted me the best power and milage returns.
And definately get with Jusnes for parts. He's a great guy and will do you right.
Rich
Up here in Mich you won't really see too much because of the temps we see. Most of the time up here it's freewheeling.
I've done a fair amount of bolt on's and drive from Howell to Ply everyday. So far the Bama tuner and underdrive have netted me the best power and milage returns.
And definately get with Jusnes for parts. He's a great guy and will do you right.
Rich
Not too sure.. *If* I do it would only be on Sat. (were very busy at work) Generally I'd take the Lightning.. but it's still down. I'd take the ranger this year if I go.
Cant miss it. It's a red FX4, tinted windows, window vents, a bull bar on the front, no nurf bars, and dual Polished Magnaflows out the rear. Oh and I keep all my cars C-L-E-A-N.
Rich
Cant miss it. It's a red FX4, tinted windows, window vents, a bull bar on the front, no nurf bars, and dual Polished Magnaflows out the rear. Oh and I keep all my cars C-L-E-A-N.
Rich
btw, here is the fan I use. Haven't really had the boat out on the hwy with it yet. So I'm not sure how it'll do. But I've sat dead still for 30+ minutes with the AC cranked before it started to get hot. At about the 45 minute mark it just could'nt keep up and I had to shut the truck off. Ran the fan for 5 minutes and it was a bit cooler. I'm considering a larger fan but they are all the louder versions.
http://www.flex-a-lite.com/auto/html/syclone.html
http://www.flex-a-lite.com/auto/html/syclone.html
Thread
Thread Starter
Forum
Replies
Last Post
Want to Buy: 3.0l Good Clutch-Fan or E-Fan setup.
Skuce
OLD - Engine & Drivetrain
6
Sep 8, 2009 09:46 PM
buzzair
General Ford Ranger Discussion
28
Jun 8, 2007 05:00 PM
CaptainScarlet
General Technical & Electrical
19
Mar 19, 2006 04:08 AM
n3elz
2.9L & 3.0L V6 Tech
38
Nov 1, 2005 04:34 PM




i want to put an e-fan on my 3.0. what do i need and where do i get all the things to do it?
