Ranger-Forums - The Ultimate Ford Ranger Resource

Ranger-Forums - The Ultimate Ford Ranger Resource (https://www.ranger-forums.com/)
-   General Technical & Electrical (https://www.ranger-forums.com/general-technical-electrical-18/)
-   -   Heat blower stopped, then started, now stopped heat works (https://www.ranger-forums.com/general-technical-electrical-18/heat-blower-stopped-then-started-now-stopped-heat-works-145057/)

nanookc Feb 16, 2015 06:54 AM

Heat blower stopped, then started, now stopped heat works
 
Blower for heat and AC stopped when it started getting cold in NEngland. Then one day started working again for a few weeks, now stopped again. Heat is coming out but no blower. COLD! What could it be and what would it cost to fix? Thanks. Not a mechanic but can fiddle around under the dash.

RLong31 Feb 16, 2015 08:20 AM

There is a blower motor that probably went bad. It's on the firewall under the hood on the passenger side. Not hard to replace.. I got my replacement from the junk yard for pretty cheap.

sheltonfilms Feb 17, 2015 12:11 PM

1 Attachment(s)
Since it stopped, then worked, then stopped again my money is on a corroded blower motor resistor connector.

Attachment 76672

nanookc Feb 17, 2015 12:37 PM

My thought as well, moter blower is fine
 
how to fix?

sheltonfilms Feb 17, 2015 01:18 PM

Take the connector off and look for corrosion. If it has some you can get small strips of sandpaper and clean it off.


All times are GMT -6. The time now is 09:35 PM.


© 2026 MH Sub I, LLC dba Internet Brands