When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi all, I had a 4” MaxTrac spindle lift installed on my ‘00 4x2 Ranger. After getting it back from the shop the pedal started going all the way to floor when reversing or after doing a U Turn. I checked all the brake lines and ruled out the master cylinder. Also bled the brakes, at this point I’m thinking maybe the front brake lines don’t have enough slack and that I should bend the hard line slightly at the caliper to allow for more slack. The problem seems to only occur sometimes when doing a full-lock maneuver. Happy to take more pictures if needed.
