i just hooked up my L1224R's in my 06, and i got the usual hyper-flash issue, and i also got when the lights were on both rear brake lights would flash.so i went, and got the electronic flasher from autozone to correctit, and while it has corrected the both rear brake lights flashing with the turn signals, but now it still hyper-flashes... am i missing something here? i have pulled the turn signal fuse (while this had corrected this in my 01 everytime i had the trailer hoooked up)

 

ok, well the new flasher hasn't corrected both brake lights flashing, any help is needed, shane?

 

What flasher did you get?

 

the EP27 from autozone

 

Hmm thats the same one I used and it all worked fine. Maybe Jp7 can help you out

 

I bought my EP27 from VLEDs, It connected perfect and no problems for a few years. Possibly you have the wrong flasher? I suggest trying to see if the stock bulbs work right with this flasher then you can know if it is related to the LEDs or not. Many people have done this mod with no problems so I am at a loss here.

 

i will try the stockers to see if it corrects the issue, the part number i got from autozone was a FL27 which replaces the EP27 flasher

 

I would bet that the FL27 is causing the problems. If it was me I would look around a few local part stores and see if any of them have anymore EP27s.

 

autozone told me that the FL27 was the direct replacement for the ep27

 

i just called napa, and they have 2 EP27's, so i will ****** one of thoes up tomorrow, and see if that fixes my problem

 

I did a lil looking and have found that the people that use the FL27 flasher and have LEDs still blink fast. Now I did find one person on some Dodge Dakota forums and he has incadesent bulbs and the FL27 worked for him.
Added some LED's to the truck today - Page 3 - F150online Forums

 

but thats running an incadesent bulb, the load on the LEDs are a bit different

 

Like I tell everybody, just get the VLEDs.com flasher and be done with it.

 

Or get one right now locally from autozone...for cheaper.



Rob...everything I was gonna say has been covered. If wired up correctly and using the LED flasher for whatever your truck takes(idk for sure if 04+ is EP27 or not), there shouldn't be any issues.

 

Yeah EP27 is what he wants, thats the one I used and it worked great.

 

Yes the FL27 worked for incandescent bulbs but not for LED's.

 

what do you thinkn i;ve been trying to do, the ******** over at autozone said teh FL27 was a direct replacement for the EP27, but yet i still get the same issues... hyper-flashing, both rear blinkers flashing when the lights are on,a nd either turn signal going


thank you, i will get down to napa after i get out of work,. and pick that up to try, adn correct this issue... i don't think i hooked the lights up wrong, i mean theres only 3 wires, and black is ground... so its not that hard

 

Yeah. But just in case....

BRN=running/park lamps
BLK=ground
Colored other(the variable)=signal/brake

 

yup, got that

 

ok, heres the situation, i got the EP27 from napa, plugged it in, stillo doing the same... so i came home, and plugged the incadesent bulbs back in, and the right turn signal will flash normal (led and incadesent will both flash) the left one flashes rapidly(just LED)

 

no one?

 

I don't know. Never seen this before. My VLEDs flasher works fine.

 

No clue. Can you post up a video of what its doing? I know you have explained it, but I would like too see it.

 

i'm stumped.


Throw incandescants in on both sides. see if it's functioning normally. I know the chances of this are slim: Wonder if that thing having a salvage/rebuilt title might have something to do with having weird *** wiring back there?

 

I thought of this thread yesterday. I saw an older ranger (the pre-red-turnsignals kind) and he had a flashing 3rd brake light that would flash like a turnsignal when he hit his brakes, even though the tail lights would stay solid fine.