I have a 2009 ranger sport and my power windows shake when they go down but are fine going up. I took the panel off the door and greased the track and a few other parts in the door but it hasn't fixed it. And I'm at a loss on how to fix it :(.

Anybody have any Ideas? All suggestions are helpful!?!

Thanks

 

wipe down the water seal inside and out. its a wet seal. (the felt thing)

 

Every Ranger with power windows I've been in does this icluding mine. I always just clean window and its fine.

 

yup, mine has this problem too, funny thing is i had to break into my truck cause i left the keys in there, and after i jimmied the door with a coat hanger between the door and window, the shake on the passenger side is gone. dont ask me how haha

 

My 08 had done this since day one.

 

Ok guys thanks for the suggestions I will give then a shot

 

Ok but how do you fix it ?

There must be away.

Are the tracks worn out ?

 

I'm trying the wiping everything down and cleaning method. I figure its worth a shot even tho I've done it b4

 

Well since most of us have had this issue I'm assuming it is a flaw with the parts and not something that developes.

 

I'm going to have to agree with this statement. My dads 02 did this, my buddies 98 does this and mine does this. And when I converted mine to power windows I used brand new window regulators and motors all from Ford. I'm thinking it's a flaw in the design of the tracks.

It's kind of annoying, but I've just grown use to it.

 

My passenger window shakes going down, but going up its fine.

Some one needs to find a fix!

 

Mine too, I like it.... :]

 

I want to convert to power windows and would like to put in a fix while I do the conversion...

Someone must have tried something that's worked !

 

Subscribed, my driver side does this

 

Was wondering if maybe it could be the bushings on the lift system ?

 

Oddly enough my 03 has never done this. The op is my brother and his are terrible

 

Agreed on the 03 mine only did it after they rebuilt my passenger door after i hit the deer but they left a nut on one of the tracks lose you might try adjusting then a little tighter to see if that helps.

 

MY 2000 chatters at the top and doesn't go up all the way. Any ideas?