Question About Keyless Entry
Question About Keyless Entry
My keyless entry in my 01 ranger edge does not seem to work. I have replaced the batteries and reset them. I was told that it might be the module? Where is this located? Any help would be great! Thanks.
So, we know that all of the PL wiring is OK and the PL solenoids are OK and that the CSM is working (with the possible exception of the receiver itself).
I would try the owner's manual fob programming again and maybe try another fob before replacing the CSM. Easier and cheaper.
I would try the owner's manual fob programming again and maybe try another fob before replacing the CSM. Easier and cheaper.
The receiver is part of the CSM and it is replaced as an assembly. The white thing in the picture:

The CSM is a possibility but I still think a problem with the fob is more likely.

The CSM is a possibility but I still think a problem with the fob is more likely.
Thread
Thread Starter
Forum
Replies
Last Post
Norm12
General Technical & Electrical
6
Dec 10, 2014 07:28 AM
ZetaOmegaRanger
General Technical & Electrical
2
Aug 8, 2004 12:30 AM




