I have a few questions for those with side exit exhausts.

Does the moisture from the exhaust effect the paint?
Is your paint stained over in that area?

those with flaresides, how long are the exhaust tips that you used?

does the moisture effect your wheels? as in stain them?

 

My tip is a bit more funky than most have. Depending on the angle, it looks like dual, but its a split tip. Its a few inches off the bed, so there are no problems with the paint, and none with the wheels.

 

pics?

 

I have had mine on for about 2 years, it doesn't affect my paint or wheels.heres a pic.

 

how long are those tips? I am thinking 8" tips but i dont know if i will have enough room...

another issue i have is the spring mounts are 6" further forward than most other rangers.

 

48a3e5e7.jpg?t=1184767120

Sorry, that's the best pic I have with it.

 

i HIGHLY doubt with the amount of lift your truck has you will have wheel acid eching problems LOL

 

Ah... a quick search on the site and I found my tip.

 

my tips are only about 6 "s long
i think if you come out on an angle like mine you might be alright.

 

why not put them side outlet behind the tire? then you wouldn't have to worry about your spring mounts being foward...

 

i cant leaf spring in the road. and i hate them hanging low

 

you will have about the same problem in the front wont you since your spring hanger was moved foward?

why not just straight out duals?

 

ok, so i just went outside and looked at mine, it's going to be hard to do on yours, because mine are nearly touching the hanger.

 

yeah that is what i am afraid of.

 

My option works well if you're worried about clearing the hangers. I'm sure the two big bends don't help performance, but if you're only doing it for looks, it should work. I wish mine didn't hang so far down. (I can't think of any other way to write that comment)

 

eh idk so many people do ti that way but i might do it that way again

duals gets pricy. its like 75 or 100 per side then.

 

lmao

 

Zach mine was $100 total from the muffler....

 

wish i could get mine done for that much.

cost me 120 for what i have now. not including the muffler.

 

true

 

I wanna get the same done Zach. I think If I move my muffler back(toward the front of the truck) and anlge the tips at a 45* I cna get 12-18" tips.

 

Or you could just do single side exit on a 45* which I plan on doing.

 

think a single out on the side will look ok though?

 

personally i am not a fan of it... unless you get a split tip.... personally i liked swoops old trucks exhaust hold on...

 

https://www.ranger-forums.com/forum2...5&postcount=21 here