tail lights - Ranger-Forums - The Ultimate Ford Ranger Resource

General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

tail lights

Reply

 
 
 
  #1  
Old 06-27-2006
fx4's Avatar
fx4
fx4 is offline
Member
Thread Starter
Join Date: Mar 2006
Location: des moines ia
Posts: 244
tail lights

o1 and o3 tail lights are the same right
 
Reply With Quote
  #2  
Old 06-27-2006
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
01-05 are the same
 
Reply With Quote
  #3  
Old 06-27-2006
dangerranger's Avatar
Member
Join Date: Aug 2005
Location: muskego, wi
Posts: 536
long thread lol
 
Reply With Quote
  #4  
Old 06-27-2006
fx4's Avatar
fx4
fx4 is offline
Member
Thread Starter
Join Date: Mar 2006
Location: des moines ia
Posts: 244
ok thank you the o1 altezza will work that i got then
 
Reply With Quote
  #5  
Old 06-27-2006
fx4's Avatar
fx4
fx4 is offline
Member
Thread Starter
Join Date: Mar 2006
Location: des moines ia
Posts: 244
you know
 
Reply With Quote
  #6  
Old 06-27-2006
jtslmn720's Avatar
RF Veteran
iTrader: (1)
Join Date: Oct 2004
Location: Kent State, Kent Ohio
Posts: 7,367
they should, some of the cheaper ones on ebay might give you a hard time but thye have the same 2 bulb set up...
 
Reply With Quote
  #7  
Old 06-27-2006
Trigger01's Avatar
RF Veteran
iTrader: (2)
Join Date: Oct 2005
Location: Knoxville, TN
Posts: 18,788
When I got my altezza's one went on easy and the other one was a pain. That's just my expierience with them.
 
Reply With Quote
  #8  
Old 06-27-2006
Rolldogg's Avatar
Member
Join Date: Jan 2006
Location: Ottawa, Ontario
Posts: 3,424
I believe 1993 - 2005 are all the same shape....just different bulb configerations and harnesses. It could be 92 but I'm not sure. I seen an argument on another forum about this and I believe this to be true. A pair of "98-05 Euro" tails that I pulled off my 01 Ranger, fit on another guys 93 with only his stock harness not fitting into the sockets. Other then that, it fit fine.
 
Reply With Quote
  #9  
Old 06-27-2006
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Originally Posted by Rolldogg
I believe 1993 - 2005 are all the same shape....just different bulb configerations and harnesses. It could be 92 but I'm not sure. I seen an argument on another forum about this and I believe this to be true. A pair of "98-05 Euro" tails that I pulled off my 01 Ranger, fit on another guys 93 with only his stock harness not fitting into the sockets. Other then that, it fit fine.
fitment is from 93-06 will bolt up... 93-99 will bolt up and PLUG in with out modding... 00-06 will bolt up and plug in with out modding...if you mix the 93-99 and 00-06 with eachother they will need complete rewiring...
 
Reply With Quote
  #10  
Old 06-28-2006
Rolldogg's Avatar
Member
Join Date: Jan 2006
Location: Ottawa, Ontario
Posts: 3,424
Originally Posted by Redneckstone
fitment is from 93-06 will bolt up... 93-99 will bolt up and PLUG in with out modding... 00-06 will bolt up and plug in with out modding...if you mix the 93-99 and 00-06 with eachother they will need complete rewiring...
Exactly.....nicley put. LOL
 
Reply With Quote
  #11  
Old 06-28-2006
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
just wanted to clear that up...
 
Reply With Quote
  #12  
Old 07-07-2006
Mark98xlt's Avatar
Member
Join Date: Jun 2004
Location: Parma Ohio
Posts: 13
Originally Posted by Redneckstone
fitment is from 93-06 will bolt up... 93-99 will bolt up and PLUG in with out modding... 00-06 will bolt up and plug in with out modding...if you mix the 93-99 and 00-06 with eachother they will need complete rewiring...

Not true, On 2000 tails they are 2 bulb lights but have a 3rd chamber that you can drill out the hole for and use a dremel for the notching. On 01+ they are 2 chamber lights But I just drilled a hole underneath the break and all is well.
 
Reply With Quote
  #13  
Old 07-07-2006
Level III Supporter
iTrader: (2)
Join Date: Jun 2004
Location: usa
Posts: 24,936
Originally Posted by Mark98xlt
Not true, On 2000 tails they are 2 bulb lights but have a 3rd chamber that you can drill out the hole for and use a dremel for the notching. On 01+ they are 2 chamber lights But I just drilled a hole underneath the break and all is well.
that would include modding to it...read carefully to what i wrote..
 
Reply With Quote
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Taylor
Interior, Exterior, Electrical, & Misc.
3
07-01-2012 08:55 PM
xavier
Exterior Semi-Tech
2
12-21-2010 02:26 PM
Masteratarms93
Interior, Exterior, Electrical, & Misc.
0
07-20-2010 12:29 AM
StrangerRanger00
Interior, Exterior, Electrical, & Misc.
5
02-19-2009 05:18 PM


Thread Tools
Search this Thread
Quick Reply: tail lights


Contact Us Sitemap Advertising Cookie Policy Privacy Statement Terms of Service

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.