Truck thinks its stolen!
Ok so I was working on my truck and somehow I tripped the anti theft system so now it wont start. All the electrical works just fine on the inside so I cant imagine what it is. I was installing a jetchip but when i finished it, it wouldnt start. So I took it out and tried it again and nothing. Is there a way to reset the theft system w/o taking it to the dealer? Cause I just called them and they said it would cost me 80 bucks for them to look at it.. even though I already told them all the symptoms.
ok so Tim who I got the chip from told me to go buy another battery which could handle the new timing which the chip changed somehow. So I did that and the truck would crank but then lock up. The THEFT light on my dash is still solid on there so I think thats whats causing it not to work. How do I fix that? |
That sounds odd, but i guess if you're intercepting wires to computer it could think somebody's trying to hotwire it or so. you could try disconnecting the battery cables.
|
yeah but if he disconnects his battery cables, he WILL lose the correct time on his radio along with ALL of his preset radio stations. :eek:
|
oh horrors:crazy::biggrin:
|
oh em gee.
|
lol....that sounds really odd, though. How do you know it's the anti-theft?
|
well when i get into the truck the theft light on the dash is lighting up.. not blinking just a solid red color..
|
I think you might need to take a trip to the dealer.
|
Check the PCM fuse.
I used to use that fuse to clear the CEL (pre-ScanGauge II). I left it out once and encountered that problem. |
if you were installing a chip and it tripped your anti-teft, then i would say call JET. and if there is a way to prove the chip caused the problem then you could make them pay for the repair bill because if im not mistaken..... it is a good bit of $$$ to have it reset.
|
It's prollay a blown fuse. When I was installing a remote starter in my wifes car, I mistakenly tapped into the wrong wire and the alarm started going nuts. I thought it was the remote start, so I pulled everything out and still the same prob. Re-checked my wires and found the mistake, then checked fuses. Don't remember which one it was, but check em all.
|
yeah if it's the chip i say that JET should be paying for it.
|
The first thing "JET" is gonna ask is if he installed it himself and if he did then they wont do jack sh*t because it probly says right on the box/package to have it professionaly installed
|
Shoulda gotten an x-cal
|
it was free.. so free vs. 400 bucks? it was worth a shot
|
bump.. I need some DIY ideas cause I cant afford the stealership at the moment.
|
when i put mine in the comp you had to scrap all the goo of the computer where the chip goes and the book said it you didn;t get all of it off the truck wouden start i would look and see if there is any
|
Originally Posted by CrazyAznEdge
(Post 985881)
bump.. I need some DIY ideas cause I cant afford the stealership at the moment.
|
Originally Posted by SuperGildo@RRP
(Post 985890)
have the truck stolen and it will confused and think you stole it back?
|
All times are GMT -6. The time now is 06:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands