How-To: Nightshade your tail lights
15 Attachment(s)
How-To author: jeweler54
Original thread: https://www.ranger-forums.com/f59/ho...-lights-83358/ Let the modding Begin!! _________________________ Items Needed: Attachment 115515 Attachment 115516 Attachment 115517 Attachment 115518 Optional: Beer... I normally drink Coors Light, but this will do: Attachment 115519 Step One: Remove your boring old tail lights.... Attachment 115520 Step Two: Wet Sand Tail Lights with 2500 Grit Sand paper Sorry no pic.... Step Three: Clean Tail Lights with Denatured Alcohol Attachment 115516 Step Four: Mask off any section that you don't want to tint Attachment 115522 Step Five: Lay down One light coat of Nightshade (enough to barely see a color difference) Attachment 115523 Step Six: Add more coats for desired shade Attachment 115524 Step Seven: Wait at least 1 hour to dry Then after tint dries, shoot a couple coats of clear (optional) Attachment 115525 http://img.photobucket.com/albums/v5...4/DSC07012.jpg Step Eight: The can says wait 24 hours to cure, but after just one hour of drying with a fan on them, they where ready to re-install------ Finished product: (mine are really dark!) Attachment 115526 Attachment 115527 Attachment 115528 Attachment 115529 |
All times are GMT -6. The time now is 07:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands