Hey fellas, I've got my old Ranger, 2003 4x4 Edge, v6 4.0L for parts. 4x4 does not work, the bearing failed inside the front differential, and the front driveshaft has been pulled. Sitting on Mazda rims with Toyo tires. Both bumpers have been relocated to better homes, bed is rusted through right behind cab, but just about everything else is there and intact. Let me know what you need! Prices are all negotiable.

 

May I ask what size rear blocks you have? If you have the 2.5", what would you want for them and the U-bolts? (shipped to 31605, Valdosta, GA.)

Also, do you happen to have a set of the silver "nipple ring" tow hooks on the front?

Throw up some pics of the truck and I'm sure dudes will hit you up!

 

You may ask whatever you'd like! I'm not sure on the height, I'm running home tonight(I live at college), I'll measure them for you. Not sure what you mean for the tow hooks, I'll take some pictures.

 

I appreciate it.

I tried to find a pic on Imgur but no luck. The tow hooks I'm talking about are the silver curved up loops, instead of the black D shaped standard tow-hooks.

Here's a pic I stole off another thread, these are the hooks I'm talking about.

 

Ohh gotchya. No, it has the flat loops.

 

Oh okay, thanks.

 

What colour is the interior and do you have grab handles?

 

Light gray and negative.

 

Seat cover colour (60/40 sear?) intact on drivers side?

 

Too bad you're so far away, I'd pick that thing apart!

Have you gotten around to measuring the rear blocks?

 

Can you check the diameter on the brake rotors?

 

The driver's side seat is torn, I've always had a seat cover on it. I'll get you a picture of the seats.

No, I have not. I'll do that today.

They are the bigger of the two sizes offered, I believe 11", but I'll pop a wheel off today and double check for you. They were replaced fairly recently.

 

Alright, if the seat/cover is torn, don't worry about it, thanks.

 

Thanks. If it has the 12" rotors (not 11.26"), I may be interested in the knuckles and calipers.

 

Sure thing. I did the entire front end when I bought it a little over a year ago, everything but the knuckle itself was replaced. I'll let you know.

 

Idle Air control valve available?

 

Rear blocks are 2.5".

 

Yup, I've still got that. Engine components haven't been touched.

 

You willing to part with the rear blocks and U-bolts? I got dibs.

 

You got it. I'll get them off this weekend, then I'll look into shipping. Offer?

 

Hmm, I'm not sure where to start. How about $40?

Cheapest shipping for the weight would probably be one of those "if it fits it shops" boxes from USPS. But then again, I'm not sure if that's cheaper.

 

Sure. And yeah, I'm not sure what shipping rates would be. I'll look into it.

 

Awesome, Thank you!

Do you happen to have a BLACK floor console? The one with the drink holders and all.

I bought one on Ebay but they sent me one that clearly wasn't the one in the picture. It's all roughed up and missing the cup holder inserts, the display was immaculate and with inserts. Trying to contact him now, ebay isn't working on my laptop.

 

Mine this one, but it doesn't have the cushion bit. It has the hinges but no cushion part. I was going to build one but never got around to it. Is that the type you're looking for?

 

The small console on the floor is the one I have currently. I wanted the one that has cup holders in it. Anything you put in the one pictured (like mine) slides off onto the floor when you turn.

I don't have a center console like pictured, I have the crappy 60/40 spilt the small armrest console. Maybe I'll get lucky one of these days and find a crashed ranger I can steal the whole interior from, seats, console, door panels, power windows/locks. All of it!

Let me know when you're ready with those rear blocks. I can shoot you money via PayPal or a check if you need.