bumpity

I have a few more 120 white 3157's & I'm modding some more 68 white 3157's too.

 

Can you do anything like this with an 1157 base? I need 6 of them for my Fairmont taillights, and i look on websites but i dont know what to buy

 

I believe I can get the 68, 102 & 120 white led's with a 1157 base too.

The LED's are a little longer than the regular bulbs, but as long as you have enough room from the bulb socket mounting spot & the inside of the lens housing, they should work.

 

Free Bump

 

Bummmp

Have a few pair of the 68 white 3157's ready, a couple pair of the 120 white 3157's ready... I'm down to my last 2 pair of the 102 white 3157's though. They may be the last 102's I do due to lack of interest

 

I cant wait to get my 120 3157s in the mail.

 

BUMP... plus info update.

In most cases when using LED's (not just my led's, but led's in general) in your turn signal sockets, you may experience the dreaded hyper-flash. This happens because of the much lower resistance of the LED's as compared with the incandescent bulbs.
The quick & easy remedy for this as well as for other LED or turn signal related issues is to upgrade the stock flasher to an EP-27 Electronic Flasher.

They should work with 95+ rangers and only take a few minutes to install. Simply locate the stock flasher under the dash or in the side panels depending on your truck, unplug the old flasher & plug in the EP-27 flasher. Finished.
Newer rangers will use a different flasher relay... I forget the number at the moment, but it's NOT the ep27.

They can be found online (evilBay) or at most auto parts stores for $12 - $16 and they all have basically the same internal components. I can't say that the expensive ones work better than the cheap ones, but I got mine on evilBay from a guy who bought the wrong one for his vehicle, it came from NAPA. I do know of a few other forum members who have got them from various evilBay sellers & have had no issues.

 

Got the 120 White 3157 in yesterday and love them so far. They replaced taillight bulbs that I got from superbrightleds.com that only had 25 red leds. The old bulbs were not working properly and seemed to not be as bright as they were originally.These are definitely brighter than my old ones ever were. I do agree that red leds make a more vibrant red but white leds still look awesome and are still nice and red. I am extremely happy with my purchase and would recommend them to anyone. I will be buying for of Buggman's products soon.

 

bump

 

bump

Running low on all of the reverse/turn/brake led's, but have parts to mod more, just need to find time.

 

Free Bump

 

Good news, Bad news...

Good:
I'm still doing these super cool & extra bright led's

Bad:
I'm going to have to go up on the pricing a little due to the increase in parts

New Pricing for my White 68, 102 & 120 3156/3157 led's:

68 white 3156/3157's $18 a pair
102 white 3156/3157's $22 a pair
120 white 3156/3157's $27 a pair shipped/insured

I have some amber & red led's in the works as well, just need to find time to work on them

 

I've got an 06 lookin to snag some 120 reverse...got any left?

 

I just got the parts to make a few pair, but haven't had a chance to get out to the garage to mod 'em yet.

Drop me a message this weekend... I hope to have a couple made up by then.

 

Saves me from asking lol I need a set at some point

 

time for a bump

 

PM'd <3