I've been reading up on how to swap in bucket seats into my 92' reg cab with a bench seat. Went to the local yard the other day, found an Escort GT, but the seats were soaking wet (no thanks). Next to it was a regular Escort, seats in good condition. I grabbed those seats along with 60/40 bench seat brackets out of a 90' reg cab Ranger. The Escort seat, tho after research says it bolts right in, is wider than the mounting holes in the truck. Also, the 60/40 rails out of the 90' Ranger have different bends up front for the holes. The 90' ones have a 45 degree angle where as mine requires a 90 degree angle. I will be making some custom adapters tomorrow, but curious to see if anyone ran into this issue before?

Edit: I did swap over the 60/40 brackets onto the Escort seats.